Home / Drivers, Receivers, Transceivers / SP232ECN-L/TR/
SP232ECN-L/TR

SP232ECN-L/TR

Manufacturer No:

SP232ECN-L/TR

Manufacturer:

MaxLinear, Inc.

Description:

IC TRANSCEIVER FULL 2/2 16SOIC

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

SP232ECN-L/TR Specifications

  • Type
    Parameter
  • Receiver Hysteresis
    500 mV
  • Supplier Device Package
    16-SOIC
  • Package / Case
    16-SOIC (0.154", 3.90mm Width)
  • Mounting Type
    Surface Mount
  • Operating Temperature
    0°C ~ 70°C
  • Voltage - Supply
    4.5V ~ 5.5V
  • Data Rate
    240kbps
  • Duplex
    Full
  • Number of Drivers/Receivers
    2/2
  • Protocol
    RS232
  • Type
    Transceiver
  • Packaging
    Cut Tape (CT)
  • Packaging
    Tape & Reel (TR)
  • Product Status
    Active
  • Series
    -
The SP232ECN-L/TR is a type of integrated circuit chip that is commonly used in serial communication applications. Here are some advantages and application scenarios of the SP232ECN-L/TR:Advantages: 1. Low Power Consumption: The SP232ECN-L/TR is designed to operate with low power consumption, making it suitable for battery-powered devices or applications that require energy efficiency. 2. Wide Operating Voltage Range: The chip can operate within a wide voltage range, typically from 3V to 5.5V, allowing flexibility in different power supply configurations. 3. High Noise Immunity: It incorporates a range of features to provide high noise immunity, ensuring reliable data transmission in noisy environments. 4. Dual Charge Pumps: The integrated dual charge pumps generate both positive and negative voltages required for RS-232 communication, eliminating the need for external capacitors and simplifying the circuit design.Application Scenarios: 1. UART/Serial Communication: The SP232ECN-L/TR is commonly used in systems that require conversion between logic-level signals and RS-232 signaling to enable communication between microcontrollers, computers, and other serial devices. 2. Industrial Automation: It can be utilized in different industrial automation applications that rely on RS-232 communication, such as factory automation systems, PLCs (Programmable Logic Controllers), and industrial control equipment. 3. Consumer Electronics: The chip is often found in consumer electronics devices that require RS-232 communication, including set-top boxes, POS terminals, data loggers, and barcode scanners. 4. Security Systems: It can be integrated into security systems, such as access control or alarm systems, where serial communication is necessary to transmit data between control panels and peripheral devices. 5. Medical Devices: The SP232ECN-L/TR can be employed in medical devices that rely on RS-232 communication for data transfer, such as patient monitors, diagnostic equipment, and medical imaging devices.It's worth noting that, while the mentioned advantages and application scenarios are common for the SP232ECN-L/TR and similar chips, specific implementations and use cases may vary. It's recommended to refer to the chip's datasheet or consult with a technical expert for detailed information related to a particular application.
SP232ECN-L/TR Relevant information