Share
MIC2551AYTS-TR
Manufacturer No:
MIC2551AYTS-TR
Manufacturer:
Description:
IC TRANSCEIVER HALF 1/1 14TSSOP
Datasheet:
Delivery:
Payment:
In Stock : 0
Please send RFQ , we will respond immediately.
MIC2551AYTS-TR Specifications
-
TypeParameter
-
Receiver Hysteresis200 mV
-
Operating Temperature-40°C ~ 85°C
-
Data Rate12Mbps
-
DuplexHalf
-
Supplier Device Package14-TSSOP
-
Package / Case14-TSSOP (0.173", 4.40mm Width)
-
Mounting TypeSurface Mount
-
Voltage - Supply4V ~ 5.25V
-
Number of Drivers/Receivers1/1
-
ProtocolUSB 2.0
-
TypeTransceiver
-
PackagingTape & Reel (TR)
-
Product StatusObsolete
-
Series-
The MIC2551AYTS-TR is a specific model of integrated circuit chip, which is a high-side load switch. Here are some advantages and application scenarios of this chip:Advantages: 1. High-side load switch: The MIC2551AYTS-TR is designed to control the power supply to loads connected on the high side of the circuit. This allows for easy control and protection of loads in various applications. 2. Low voltage operation: The chip can operate at low voltages, typically ranging from 1.7V to 5.5V. This makes it suitable for use in low-power and battery-powered devices. 3. Low quiescent current: The quiescent current, which is the current consumed by the chip when it is in standby mode, is very low. This helps in reducing power consumption and extending battery life in portable devices. 4. Thermal shutdown protection: The chip has built-in thermal shutdown protection, which prevents it from overheating and getting damaged during abnormal operating conditions. 5. Fault flag output: The MIC2551AYTS-TR has a fault flag output pin that can be used to indicate any fault conditions, such as overcurrent or overtemperature, to the system controller.Application scenarios: 1. Portable devices: The low voltage operation and low quiescent current make the MIC2551AYTS-TR suitable for use in portable devices like smartphones, tablets, and wearable devices. It can be used to control power supply to various components, such as sensors, LEDs, or wireless modules. 2. Industrial automation: The chip can be used in industrial automation systems to control power supply to loads like motors, actuators, or solenoids. The fault flag output can be used to provide feedback to the system controller in case of any faults. 3. Automotive electronics: The MIC2551AYTS-TR can be used in automotive applications to control power supply to various loads, such as lights, fans, or motors. The thermal shutdown protection ensures safe operation even in high-temperature environments. 4. IoT devices: With the increasing popularity of IoT devices, the MIC2551AYTS-TR can be used to control power supply to sensors, actuators, or communication modules in smart home systems, industrial IoT applications, or environmental monitoring systems.These are just a few examples of the advantages and application scenarios of the MIC2551AYTS-TR integrated circuit chip. The specific usage depends on the requirements of the system and the load being controlled.
MIC2551AYTS-TR Relevant information
