Home / Memory / AT24C01-10PI-2.7/
AT24C01-10PI-2.7

AT24C01-10PI-2.7

Manufacturer No:

AT24C01-10PI-2.7

Manufacturer:

Microchip Technology

Description:

IC EEPROM 1KBIT I2C 400KHZ 8DIP

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

AT24C01-10PI-2.7 Specifications

  • Type
    Parameter
  • Clock Frequency
    400 kHz
  • Supplier Device Package
    8-PDIP
  • Package / Case
    8-DIP (0.300", 7.62mm)
  • Mounting Type
    Through Hole
  • Operating Temperature
    -40°C ~ 85°C (TA)
  • Voltage - Supply
    2.7V ~ 5.5V
  • Access Time
    900 ns
  • Write Cycle Time - Word, Page
    10ms
  • Memory Interface
    I²C
  • Memory Organization
    128 x 8
  • Memory Size
    1Kbit
  • Technology
    EEPROM
  • Memory Format
    EEPROM
  • Memory Type
    Non-Volatile
  • DigiKey Programmable
    Not Verified
  • Packaging
    Tube
  • Product Status
    Obsolete
  • Series
    -
The AT24C01-10PI-2.7 is a specific integrated circuit chip (IC) developed by Microchip Technology. It belongs to the AT24C family of Serial EEPROMs. Here are some advantages and application scenarios of the AT24C01-10PI-2.7 IC chips:Advantages: 1. Non-volatile Memory: The AT24C01-10PI-2.7 chip provides non-volatile memory, meaning that it retains data even when power is disconnected. This is beneficial in scenarios where data needs to be stored and retrieved even after power cycles. 2. Low Power Consumption: These IC chips have low power consumption, making them suitable for battery-powered applications. 3. High Storage Capacity: The AT24C01-10PI-2.7 chip offers a storage capacity of 1 kilobit (128 bytes). This is sufficient for storing small data sets or configuration information. 4. Serial Interface: The chip communicates using a two-wire serial interface (I2C protocol), which allows for simple integration into various systems. 5. Small Form Factor: The package type of the IC chip is PDIP (Plastic Dual Inline Package), which is compact and commonly used in electronic devices.Application Scenarios: 1. Consumer Electronics: The AT24C01-10PI-2.7 can be used in consumer electronics like TVs, set-top boxes, and audio/video equipment for storing device configurations, settings, and user preferences. 2. Embedded Systems: It is suitable for embedded systems, such as microcontrollers or sensors, where small amounts of non-volatile memory are required for data logging, calibration data, or firmware storage. 3. Industrial Control Systems: The AT24C01-10PI-2.7 chip can be employed in industrial control systems for storing configuration parameters, device identification, or system calibration data. 4. Medical Devices: It can be utilized in medical devices for storing patient information, sensor calibration, or settings data. 5. Automotive Applications: The chip can find application in automotive systems for storing vehicle configuration, user preferences, or diagnostic information.It is important to note that specific application requirements may vary, and the suitability of the AT24C01-10PI-2.7 IC chip should be evaluated based on the individual project's needs.
AT24C01-10PI-2.7 Relevant information