Home / Memory / AT24C64B-10TU-1.8/
AT24C64B-10TU-1.8

AT24C64B-10TU-1.8

Manufacturer No:

AT24C64B-10TU-1.8

Manufacturer:

Microchip Technology

Description:

IC EEPROM 64KBIT I2C 8TSSOP

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

AT24C64B-10TU-1.8 Specifications

  • Type
    Parameter
  • Supplier Device Package
    8-TSSOP
  • Package / Case
    8-TSSOP (0.173", 4.40mm Width)
  • Mounting Type
    Surface Mount
  • Operating Temperature
    -40°C ~ 85°C (TA)
  • Voltage - Supply
    1.8V ~ 5.5V
  • Access Time
    900 ns
  • Write Cycle Time - Word, Page
    5ms
  • Clock Frequency
    400 kHz
  • Memory Interface
    I²C
  • Memory Organization
    8K x 8
  • Memory Size
    64Kbit
  • Technology
    EEPROM
  • Memory Format
    EEPROM
  • Memory Type
    Non-Volatile
  • DigiKey Programmable
    Not Verified
  • Packaging
    Tube
  • Product Status
    Active
  • Series
    -
The AT24C64B-10TU-1.8 is an integrated circuit chip that belongs to the AT24C series of EEPROM (Electrically Erasable Programmable Read-Only Memory) chips manufactured by Microchip Technology. Here are some advantages and application scenarios of the AT24C64B-10TU-1.8:Advantages: 1. Large Storage Capacity: The AT24C64B-10TU-1.8 has a storage capacity of 64 kilobits (8 kilobytes), which allows for storing a significant amount of data. 2. Non-Volatile Memory: The data stored in the chip remains intact even when the power is turned off, making it suitable for applications where data persistence is required. 3. Low Power Consumption: The chip operates at low power, making it energy-efficient and suitable for battery-powered devices. 4. High Reliability: The AT24C64B-10TU-1.8 offers high reliability with a guaranteed minimum of 1 million write cycles and 100 years of data retention. 5. I2C Interface: The chip uses the I2C (Inter-Integrated Circuit) interface, which is a widely used serial communication protocol, allowing for easy integration with microcontrollers and other devices.Application Scenarios: 1. Data Storage: The AT24C64B-10TU-1.8 can be used for storing configuration data, user settings, or other non-volatile data in various electronic devices such as consumer electronics, industrial equipment, and automotive systems. 2. Security Systems: The chip can be utilized in security systems for storing access control data, user credentials, or event logs. 3. Sensor Calibration: In applications involving sensors, the AT24C64B-10TU-1.8 can store calibration data, ensuring accurate measurements and calibration settings even after power cycles. 4. Embedded Systems: The chip can be used in embedded systems for firmware storage, parameter storage, or device identification purposes. 5. IoT Devices: With its low power consumption and I2C interface, the AT24C64B-10TU-1.8 is suitable for IoT devices that require non-volatile memory for storing configuration data, device identifiers, or firmware updates.These are just a few examples of the advantages and application scenarios of the AT24C64B-10TU-1.8 integrated circuit chip. Its versatility, reliability, and non-volatile memory capabilities make it a popular choice in various electronic applications.
AT24C64B-10TU-1.8 Relevant information