Home / Memory / 24LC32AT-E/MNY/
24LC32AT-E/MNY

24LC32AT-E/MNY

Manufacturer No:

24LC32AT-E/MNY

Manufacturer:

Microchip Technology

Description:

IC EEPROM 32KBIT I2C 8TDFN

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

24LC32AT-E/MNY Specifications

  • Type
    Parameter
  • Access Time
    900 ns
  • Supplier Device Package
    8-TDFN (2x3)
  • Package / Case
    8-WFDFN Exposed Pad
  • Mounting Type
    Surface Mount
  • Operating Temperature
    -40°C ~ 125°C (TA)
  • Voltage - Supply
    2.5V ~ 5.5V
  • Write Cycle Time - Word, Page
    5ms
  • Clock Frequency
    400 kHz
  • Memory Interface
    I²C
  • Memory Organization
    4K x 8
  • Memory Size
    32Kbit
  • Technology
    EEPROM
  • Memory Format
    EEPROM
  • Memory Type
    Non-Volatile
  • DigiKey Programmable
    Not Verified
  • Packaging
    Cut Tape (CT)
  • Packaging
    Tape & Reel (TR)
  • Product Status
    Active
  • Series
    -
The CAT24C256HU4IGT3 is an integrated circuit chip that belongs to Microchip's CAT24Cxxx series of Serial EEPROMs. Here are some advantages and typical application scenarios of the CAT24C256HU4IGT3 chip:Advantages: 1. High storage capacity: The CAT24C256HU4IGT3 chip has a storage capacity of 256 kilobits (32 kilobytes), which is useful for storing data such as configuration settings, calibration data, or small non-volatile memory requirements. 2. Serial interface: This chip uses the I2C (Inter-Integrated Circuit) serial bus protocol for communication, enabling easy interfacing with microcontrollers and other digital devices. 3. Low power consumption: The chip operates at low power, making it suitable for portable and low-power applications. 4. Extended temperature range: It is designed for operation across a wide temperature range, typically from -40°C to 85°C, making it suitable for various industrial, automotive, and commercial applications. 5. Data integrity and reliability: The CAT24C256HU4IGT3 chip incorporates built-in hardware and software write protection mechanisms, as well as an ECC (Error Correction Code) feature, ensuring data integrity and reliability.Application scenarios: 1. Industrial control systems: The CAT24C256HU4IGT3 chip can be used for storing configuration data, calibration constants, or other critical information in industrial automation and control applications. 2. Automotive applications: It can be utilized in automotive electronics, such as storing critical data for engine control units (ECUs), dashboard displays, or sensor calibration data. 3. Consumer electronics: The chip can be applied in appliances, smart TVs, set-top boxes, or other consumer electronics for storing device configurations, user preferences, or firmware updates. 4. Medical devices: The CAT24C256HU4IGT3 chip's reliability and robustness make it suitable for use in medical equipment, where storing critical patient or device-related data is essential. 5. Internet of Things (IoT) devices: The chip's low power consumption and I2C interface make it suitable for IoT devices, including smart sensors, wearable devices, and other edge devices where low power and small memory requirements are crucial.These are just a few examples, and the CAT24C256HU4IGT3 chip can be adapted to various other applications that require non-volatile data storage with low power consumption and reliability.
24LC32AT-E/MNY Relevant information