Home / Translators, Level Shifters / ADG3233BRM/
ADG3233BRM

ADG3233BRM

Manufacturer No:

ADG3233BRM

Manufacturer:

Analog Devices Inc.

Description:

IC TRNSLTR BIDIRECTIONAL 8MSOP

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

ADG3233BRM Specifications

  • Type
    Parameter
  • Supplier Device Package
    8-MSOP
  • Package / Case
    8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
  • Mounting Type
    Surface Mount
  • Features
    Bypass Circuit
  • Operating Temperature
    -40°C ~ 85°C (TA)
  • Data Rate
    10Mbps
  • Output Type
    Non-Inverted
  • Output Signal
    -
  • Input Signal
    -
  • Voltage - VCCB
    1.65 V ~ 3.6 V
  • Voltage - VCCA
    1.65 V ~ 3.6 V
  • Channels per Circuit
    1
  • Number of Circuits
    1
  • Channel Type
    Bidirectional
  • Translator Type
    Voltage Level
  • Packaging
    Tube
  • Packaging
    Tube
  • Product Status
    Obsolete
  • Series
    -
The 74LVCH2T45GM,125 is a specific integrated circuit (IC) chip that belongs to the 74LVCH series. This chip is a dual-bit, dual-supply voltage level translator with 3-state outputs. It is designed to facilitate bidirectional level translation between two voltage domains, making it useful in various applications. Advantages of the 74LVCH2T45GM,125 IC chip include:1. Voltage Level Translation: The primary advantage of this chip is its ability to translate voltage levels between two different domains. It supports bidirectional communication, allowing signals to be transmitted from one voltage domain to another.2. Dual-Bit Operation: The chip is designed to handle two bits simultaneously, making it suitable for applications involving parallel data transmission or bidirectional communication between two devices.3. 3-State Outputs: The 74LVCH2T45GM,125 features 3-state outputs, which means it can be set to high impedance state (Z) when not actively driving the bus. This feature allows multiple devices to share a common bus without interfering with each other.4. Low Voltage Operation: The "LV" in the chip's name stands for low voltage, indicating that it operates at lower voltage levels. This makes it compatible with modern low-voltage systems, such as those found in portable devices or battery-powered applications.Application scenarios for the 74LVCH2T45GM,125 IC chip include:1. Communication Interfaces: The chip can be used in various communication interfaces, such as UART, I2C, SPI, or other serial protocols, where voltage level translation is required between different devices operating at different voltage levels.2. Mixed Voltage Systems: It is commonly used in systems where different components or subsystems operate at different voltage levels. The chip enables seamless communication between these subsystems by translating the voltage levels.3. Bus Sharing: The 3-state outputs of the chip make it suitable for bus sharing scenarios, where multiple devices need to communicate over a shared bus. The chip ensures that only one device drives the bus at a time, preventing data corruption or conflicts.4. Battery-Powered Devices: Due to its low voltage operation, the chip is well-suited for battery-powered devices, such as smartphones, tablets, or portable electronics. It allows efficient communication between different voltage domains while minimizing power consumption.It's important to note that the specific application and advantages of the 74LVCH2T45GM,125 IC chip may vary depending on the requirements of the system it is being used in. It is always recommended to consult the chip's datasheet and application notes for detailed information and guidelines on its usage.
ADG3233BRM Relevant information