Home / Translators, Level Shifters / SN65EPT22DGKR/
SN65EPT22DGKR

SN65EPT22DGKR

Manufacturer No:

SN65EPT22DGKR

Manufacturer:

Texas Instruments

Description:

IC TRANSLATOR UNIDIR 8VSSOP

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

SN65EPT22DGKR Specifications

  • Type
    Parameter
  • Supplier Device Package
    8-VSSOP
  • Package / Case
    8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
  • Mounting Type
    Surface Mount
  • Features
    -
  • Operating Temperature
    -40°C ~ 85°C (TA)
  • Data Rate
    -
  • Output Type
    Differential
  • Output Signal
    LVPECL
  • Input Signal
    LVCMOS, LVTTL
  • Channels per Circuit
    2
  • Number of Circuits
    1
  • Channel Type
    Unidirectional
  • Translator Type
    Mixed Signal
  • Packaging
    Cut Tape (CT)
  • Packaging
    Tape & Reel (TR)
  • Product Status
    Active
  • Series
    65EPT
The SN74AVCB324245KR REEL is a specific model of integrated circuit chip manufactured by Texas Instruments. It is a 32-bit bus transceiver with 3-state outputs, designed for voltage level translation between different logic levels. Here are some advantages and application scenarios of this chip:Advantages: 1. Voltage Level Translation: The primary advantage of this chip is its ability to translate logic levels between different voltage domains. It can handle voltage translation between 1.2V, 1.5V, 1.8V, 2.5V, 3.3V, and 5V, making it suitable for interfacing between different logic families.2. Bidirectional Data Transfer: The chip supports bidirectional data transfer, allowing data to be transmitted in both directions across the bus. This makes it useful for applications where data needs to be exchanged between different components or systems.3. High-Speed Operation: The SN74AVCB324245KR REEL is designed to operate at high speeds, making it suitable for applications that require fast data transfer rates.4. 3-State Outputs: The chip features 3-state outputs, which means that the outputs can be actively driven to a logic high or low state, or they can be placed in a high-impedance state (disconnected). This allows multiple devices to share a common bus without interfering with each other.Application Scenarios: 1. Mixed Voltage Systems: The chip is commonly used in systems where different components operate at different voltage levels. It enables seamless communication between these components by translating the logic levels.2. Bus Interfacing: The SN74AVCB324245KR REEL is often used to interface between different buses or subsystems that operate at different voltage levels. It ensures proper signal integrity and data transfer between these systems.3. Microcontroller/Processor Communication: In systems where microcontrollers or processors with different voltage levels need to communicate, this chip can be used to bridge the voltage gap and enable data exchange.4. Industrial Automation: The chip finds applications in industrial automation systems where different modules or devices operate at different voltage levels. It facilitates communication and data transfer between these modules.5. Consumer Electronics: The SN74AVCB324245KR REEL can be used in various consumer electronic devices, such as smartphones, tablets, and gaming consoles, where different components may operate at different voltage levels.It's important to note that the specific application scenarios may vary depending on the requirements of the system and the designer's needs.
SN65EPT22DGKR Relevant information