Home / Translators, Level Shifters / RS0102YH8/
RS0102YH8

RS0102YH8

Manufacturer No:

RS0102YH8

Manufacturer:

Runic Technology

Description:

IC TRANSLATOR BIDIR SOT23-8

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

RS0102YH8 Specifications

  • Type
    Parameter
  • Supplier Device Package
    SOT-23-8
  • Package / Case
    SOT-23-8
  • Mounting Type
    Surface Mount
  • Features
    -
  • Operating Temperature
    -40°C ~ 85°C (TA)
  • Data Rate
    24Mbps
  • Output Type
    Open Drain, Push-Pull
  • Output Signal
    -
  • Input Signal
    -
  • Voltage - VCCB
    2.3 V ~ 5.5 V
  • Voltage - VCCA
    1.65 V ~ 5.5 V
  • Channels per Circuit
    2
  • Number of Circuits
    1
  • Channel Type
    Bidirectional
  • Translator Type
    Voltage Level
  • Packaging
    Cut Tape (CT)
  • Packaging
    Tape & Reel (TR)
  • Product Status
    Active
  • Series
    -
The SN74ALVCH162836GR is a 20-bit configurable dual supply voltage 10-bit configurable voltage-translating transceiver. Here are some advantages and application scenarios of this integrated circuit (IC) chip:1. Bidirectional voltage translation: One of the key advantages of SN74ALVCH162836GR is its ability to translate voltage levels bidirectionally between two buses of different voltage domains. It supports voltage level translation from 2.7V to 3.6V on one side (VCCA) and 1.65V to 3.6V on the other side (VCCB). This provides compatibility between devices operating at different voltage levels.2. Little-endian/buffered voltage-level translator: The IC chip operates as a little-endian voltage-level translator for controlling data transfers between buses of different voltage levels. It has separate direction control for each 10-bit data port.3. Configurable voltage-level translation: The SN74ALVCH162836GR allows the user to configure the data width and voltage levels of both voltage domains. This enables flexibility in adapting the IC to various application scenarios.4. Support for live insertion/extraction: The IC chip is designed to allow for live insertion and extraction of translation boards, even if the voltages on the two sides are different. This makes it suitable for hot-plugging applications.5. Bus isolation and break-before-make switching: The integrated circuit provides isolation between the data ports when the direction control is in the high-impedance state. It ensures break-before-make switching, avoiding any contention or short-circuits during the voltage level translation process.Application scenarios for SN74ALVCH162836GR:1. Interface translation in mixed-voltage systems: The IC can be used to enable communication between microcontrollers, processors, or other digital devices operating at different voltage levels. It is commonly used in mixed-voltage systems or systems where compatibility between different voltage domains is required.2. Industrial automation and control: The IC chip finds applications in industrial automation and control systems where voltage translation is needed to interface components operating at different voltage levels, such as sensors, actuators, and controllers.3. Mobile devices: In mobile devices, where multiple voltage domains exist (e.g., core logic at a lower voltage than peripherals), the SN74ALVCH162836GR can translate signals between different parts of the system, facilitating proper data communication.4. Communication systems: It can be used in communication systems where voltage translation and compatibility are required between different modules, boards, or subsystems.5. Consumer electronics: The IC chip can also be found in various consumer electronics devices, such as gaming consoles, home automation systems, and portable electronics, to facilitate communication between components with different voltage requirements.Overall, the SN74ALVCH162836GR integrated circuit chip provides a solution for voltage-level translation challenges, allowing devices with different voltage requirements to communicate effectively.
RS0102YH8 Relevant information