AM2902ADC
Manufacturer No:
AM2902ADC
Manufacturer:
Description:
LOOK-AHEAD CARRY GENERATOR
Datasheet:
Delivery:
![](/static/public/images/DHL.png)
![](/static/public/images/TNT.webp)
![](/static/public/images/UPS.png)
![](/static/public/images/FedEx.png)
![](/static/public/images/SF-Express.webp)
Payment:
![](/static/public/images/paypal.png)
![](/static/public/images/paypal02.png)
![](/static/public/images/paypal03.png)
![](/static/public/images/paypal04.png)
In Stock : 413
Please send RFQ , we will respond immediately.
![](/static/public/images/kenko_Certif02.png)
![](/static/public/images/kenko_Certif07.png)
![](/static/public/images/kenko_Certif03.png)
![](/static/public/images/kenko_Certif04.png)
![](/static/public/images/kenko_Certif08.png)
![](/static/public/images/kenko_Certif10.png)
![](/static/public/images/kenko_Certif09.png)
![](/static/public/images/kenko_Certif05.png)
![](/static/public/images/kenko_Certif06.png)
AM2902ADC Specifications
-
TypeParameter
-
Supplier Device Package16-CDIP
-
Package / Case16-CDIP (0.300", 7.62mm)
-
Mounting TypeThrough Hole
-
Operating Temperature0°C ~ 70°C
-
Number of Bits4
-
Supply Voltage4.5V ~ 5.5V
-
Logic TypeLook-ahead Carry Generator
-
PackagingBulk
-
Product StatusActive
-
Series-
The SN74LVC1T45QDCKRQ1 is a single-bit dual-supply bus transceiver with configurable voltage translation and 3-state outputs. Some of the advantages and application scenarios of this integrated circuit chip are as follows:Advantages: 1. Voltage Translation: The chip allows bidirectional level shifting between different voltage domains, making it suitable for interfacing between devices operating at different voltage levels. 2. Configurability: The voltage translation direction can be controlled using the OE (Output Enable) input pin, allowing flexibility in the design. 3. Low Power Consumption: The chip is designed to operate at low power, making it suitable for battery-powered applications. 4. Wide Operating Voltage Range: It supports a wide voltage range, allowing compatibility with various voltage levels. 5. ESD Protection: The chip provides Electrostatic Discharge (ESD) protection, ensuring robustness against transient voltage spikes.Application Scenarios: 1. Mixed Voltage Systems: The SN74LVC1T45QDCKRQ1 is commonly used in systems where different components or subsystems operate at different voltage levels. It enables seamless communication between these components by translating the voltage levels. 2. Battery-Powered Devices: Due to its low power consumption, the chip is suitable for use in portable and battery-powered devices, such as smartphones, tablets, and wearables. 3. Industrial Automation: In industrial automation systems, where different sensors, actuators, and controllers operate at different voltage levels, this chip can be used to interface between them. 4. IoT Devices: With the increasing popularity of IoT devices, which often have diverse voltage requirements, the SN74LVC1T45QDCKRQ1 can be used to enable communication between different IoT modules or subsystems. 5. Automotive Electronics: The SN74LVC1T45QDCKRQ1 is specifically designed for automotive applications, making it suitable for use in automotive electronics, such as infotainment systems, sensors, and control modules.It is important to note that the specific application and advantages may vary depending on the system requirements and design considerations.
AM2902ADC Relevant information
-
M38510/34201BEA
Texas Instruments -
SNJ54ABT18245AWD
Texas Instruments -
SNJ54LS181J
Texas Instruments -
M38510/34201BFA
Texas Instruments -
M38510/34201B2A
Texas Instruments -
SN54F283J
Texas Instruments -
SNJ54ABT18502HV
Texas Instruments -
SNJ54ABT8543FK
Texas Instruments -
M38510/07801BJA
Texas Instruments -
SNJ54BCT8245AJT
Texas Instruments