Home / Signal Switches, Multiplexers, Decoders / 74CBTLV16212GRE4/
74CBTLV16212GRE4

74CBTLV16212GRE4

Manufacturer No:

74CBTLV16212GRE4

Manufacturer:

Texas Instruments

Description:

IC BUS FET EXC SW 12X2:2 56TSSOP

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

74CBTLV16212GRE4 Specifications

  • Type
    Parameter
  • Supplier Device Package
    56-TSSOP
  • Package / Case
    56-TFSOP (0.240", 6.10mm Width)
  • Mounting Type
    Surface Mount
  • Operating Temperature
    -40°C ~ 85°C
  • Voltage - Supply
    2.3V ~ 3.6V
  • Voltage Supply Source
    Single Supply
  • Current - Output High, Low
    -
  • Independent Circuits
    1
  • Circuit
    12 x 2:2
  • Type
    Bus FET Exchange Switch
  • Packaging
    Tape & Reel (TR)
  • Product Status
    Discontinued at Digi-Key
  • Series
    74CBTLV
The SN74AHC138DGVR is a 3-to-8 line decoder/demultiplexer integrated circuit chip. Here are some advantages and application scenarios for this chip:Advantages: 1. High-speed operation: The SN74AHC138DGVR operates at a high-speed of up to 5.5V with typical propagation delay of 10ns. 2. Wide operating voltage range: It can handle voltage levels from 2V to 5.5V, making it compatible with a wide range of microcontrollers and digital logic circuits. 3. Low power consumption: The chip has a low power dissipation of 12μW (typical) at a 1-MHz frequency. 4. Outputs with latches: The chip has active LOW outputs with latches, which helps to reduce power consumption and prevent glitching during the decoding process. 5. ESD protection: It provides ESD (Electrostatic Discharge) protection of up to 2000V, ensuring robustness against electrostatic discharges.Application Scenarios: 1. Memory decoding: The SN74AHC138DGVR can be used to decode memory address lines. By connecting the address lines of a memory module or IC to the inputs of the decoder, it can select a specific memory location, enabling read or write operations. 2. Peripheral selection: In a system with multiple peripheral devices, such as microcontrollers or sensors, the decoder can be used to select a specific peripheral based on a set of input control signals. 3. Data routing and selection: The chip can be used to route data from a single source to multiple destinations or to selectively enable/disable specific data paths in digital systems. 4. Address decoding: It can be used in memory-mapped I/O systems to decode specific addresses and enable corresponding input/output lines. 5. LED matrix control: The decoder can be used to control a matrix of LEDs, where the input lines select a specific LED and the output lines control its on/off state.Overall, the SN74AHC138DGVR chip offers advantages such as high-speed operation, wide voltage range, low power consumption, and ESD protection. It finds applications in memory decoding, peripheral selection, data routing, address decoding, and LED matrix control, among others.
74CBTLV16212GRE4 Relevant information