Home / Latches / 74AHCT259D-Q100J/
74AHCT259D-Q100J

74AHCT259D-Q100J

Manufacturer No:

74AHCT259D-Q100J

Manufacturer:

NXP USA Inc.

Description:

IC ADDRESSABLE LATCH 8BIT 16SOIC

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

74AHCT259D-Q100J Specifications

  • Type
    Parameter
  • Supplier Device Package
    16-SO
  • Package / Case
    16-SOIC (0.154", 3.90mm Width)
  • Mounting Type
    Surface Mount
  • Operating Temperature
    -40°C ~ 125°C
  • Current - Output High, Low
    8mA, 8mA
  • Delay Time - Propagation
    10ns
  • Independent Circuits
    1
  • Voltage - Supply
    4.5V ~ 5.5V
  • Output Type
    Standard
  • Circuit
    1:8
  • Logic Type
    D-Type, Addressable
  • Packaging
    Tape & Reel (TR)
  • Product Status
    Obsolete
  • Series
    74AHCT
The 74AHCT259D-Q100J is a high-speed CMOS integrated circuit chip that functions as an 8-bit addressable latch with 3-state outputs. Some of the advantages and application scenarios of this chip are as follows:Advantages: 1. High-speed operation: The 74AHCT259D-Q100J chip operates at high speeds, making it suitable for applications that require fast data transfer and processing. 2. Low power consumption: This chip has low power consumption, making it energy-efficient and suitable for battery-powered devices. 3. Wide operating voltage range: It can operate within a wide voltage range, typically between 4.5V and 5.5V, making it compatible with various power supply systems. 4. 3-state outputs: The chip has 3-state outputs, allowing multiple devices to be connected to a common bus without any conflict. 5. Schmitt-trigger inputs: The inputs of this chip have Schmitt-trigger characteristics, which provide hysteresis and improve noise immunity.Application Scenarios: 1. Address decoding: The 74AHCT259D-Q100J chip can be used in address decoding circuits to select specific memory locations or peripheral devices based on the address inputs. 2. Data multiplexing: It can be used to multiplex data from multiple sources onto a single bus, allowing efficient data transfer and sharing of resources. 3. Bus interface: The chip can be used as a bus interface to connect multiple devices to a common data bus, enabling communication and data transfer between them. 4. Control signal generation: It can be used to generate control signals for various applications, such as enabling or disabling specific functions or devices based on the input conditions. 5. Register storage: The chip can be used to store data temporarily in registers, allowing sequential processing or data manipulation.These are just a few examples of the advantages and application scenarios of the 74AHCT259D-Q100J integrated circuit chip. Its versatility and high-speed operation make it suitable for various digital logic and control applications.
74AHCT259D-Q100J Relevant information