Home / Latches / SN74HCT373N/
SN74HCT373N

SN74HCT373N

Manufacturer No:

SN74HCT373N

Manufacturer:

Texas Instruments

Description:

IC D-TYPE TRANSP SGL 8:8 20DIP

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

SN74HCT373N Specifications

  • Type
    Parameter
  • Supplier Device Package
    20-PDIP
  • Package / Case
    20-DIP (0.300", 7.62mm)
  • Mounting Type
    Through Hole
  • Operating Temperature
    -40°C ~ 85°C
  • Current - Output High, Low
    6mA, 6mA
  • Delay Time - Propagation
    25ns
  • Independent Circuits
    1
  • Voltage - Supply
    4.5V ~ 5.5V
  • Output Type
    Tri-State
  • Circuit
    8:8
  • Logic Type
    D-Type Transparent Latch
  • Packaging
    Tube
  • Packaging
    Bulk
  • Product Status
    Active
  • Series
    74HCT
The SN74HCT373N is an integrated circuit chip that belongs to the 74HCT series of high-speed CMOS logic devices. It is an octal transparent latch with 3-state outputs, which means it can store and output data in eight separate bits. Here are some advantages and application scenarios of the SN74HCT373N:Advantages: 1. High-speed operation: The SN74HCT373N operates at a high-speed, making it suitable for applications that require quick data storage and retrieval. 2. 3-state outputs: The chip has 3-state outputs, which means it can be put into a high-impedance state, allowing multiple devices to share a common bus without interfering with each other. 3. Wide operating voltage range: The SN74HCT373N can operate within a wide voltage range, typically from 4.5V to 5.5V, making it compatible with various power supply systems. 4. Low power consumption: The chip has low power consumption, making it suitable for battery-powered devices or applications where power efficiency is crucial.Application scenarios: 1. Data storage and retrieval: The SN74HCT373N can be used to store and retrieve data in various digital systems, such as microcontrollers, memory units, or data buses. 2. Address decoding: The chip can be used in address decoding circuits to select specific memory locations or peripheral devices based on the address lines. 3. Bus interfacing: The 3-state outputs of the SN74HCT373N make it suitable for bus interfacing applications, where multiple devices need to share a common data bus. 4. Parallel-to-serial conversion: The chip can be used to convert parallel data into serial data, which is useful in applications such as serial communication protocols or data transmission over a single wire.Overall, the SN74HCT373N integrated circuit chip offers high-speed data storage, 3-state outputs, and compatibility with various voltage ranges, making it versatile for a range of digital applications.
SN74HCT373N Relevant information