Home / Flip Flops / SN74BCT574DW/
SN74BCT574DW

SN74BCT574DW

Manufacturer No:

SN74BCT574DW

Manufacturer:

Texas Instruments

Description:

IC FF D-TYPE SNGL 8BIT 20SOIC

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

SN74BCT574DW Specifications

  • Type
    Parameter
  • Package / Case
    20-SOIC (0.295", 7.50mm Width)
  • Supplier Device Package
    20-SOIC
  • Mounting Type
    Surface Mount
  • Operating Temperature
    0°C ~ 70°C (TA)
  • Input Capacitance
    5.5 pF
  • Current - Quiescent (Iq)
    8 mA
  • Voltage - Supply
    4.5V ~ 5.5V
  • Current - Output High, Low
    15mA, 64mA
  • Trigger Type
    Positive Edge
  • Max Propagation Delay @ V, Max CL
    8.6ns @ 5V, 50pF
  • Clock Frequency
    77 MHz
  • Number of Bits per Element
    8
  • Number of Elements
    1
  • Output Type
    Tri-State, Non-Inverted
  • Type
    D-Type
  • Function
    Standard
  • Packaging
    Tube
  • Packaging
    Bulk
  • Product Status
    Active
  • Series
    74BCT
The SN74BCT574DW is a specific integrated circuit (IC) chip manufactured by Texas Instruments. It is an octal D-type flip-flop with 3-state outputs. Here are some advantages and application scenarios of this chip:Advantages: 1. High-speed operation: The SN74BCT574DW is designed for high-speed applications, making it suitable for use in systems that require fast data transfer and processing.2. 3-state outputs: The chip's 3-state outputs allow multiple devices to share a common bus, enabling efficient data communication and reducing the number of required pins.3. Wide operating voltage range: The chip can operate within a wide voltage range, typically from 4.5V to 5.5V, making it compatible with various power supply configurations.Application scenarios: 1. Data storage and transfer: The SN74BCT574DW can be used in systems that require data storage and transfer, such as memory units, registers, and data buses. Its flip-flop design allows for the storage and synchronization of data.2. Address decoding: The chip can be utilized in address decoding circuits, which are commonly used in microprocessors and memory systems. It helps in selecting specific memory locations or peripheral devices based on the address signals received.3. Bus interfacing: The 3-state outputs of the SN74BCT574DW make it suitable for bus interfacing applications. It can be used to connect multiple devices to a common bus, allowing for efficient data exchange between them.4. Control signal generation: The chip can generate control signals based on input data, making it useful in various control applications. It can be employed to enable or disable specific functions or operations within a system.It's important to note that the specific advantages and application scenarios of the SN74BCT574DW may vary depending on the requirements of the system and the overall design considerations. It's always recommended to consult the chip's datasheet and relevant technical documentation for detailed information.
SN74BCT574DW Relevant information