Home / Flip Flops / SN74AC534N/
SN74AC534N

SN74AC534N

Manufacturer No:

SN74AC534N

Manufacturer:

Texas Instruments

Description:

IC FF D-TYPE SNGL 8BIT 20DIP

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

SN74AC534N Specifications

  • Type
    Parameter
  • Package / Case
    20-DIP (0.300", 7.62mm)
  • Supplier Device Package
    20-PDIP
  • Mounting Type
    Through Hole
  • Operating Temperature
    -40°C ~ 85°C (TA)
  • Input Capacitance
    4.5 pF
  • Current - Quiescent (Iq)
    4 µA
  • Voltage - Supply
    2V ~ 6V
  • Current - Output High, Low
    24mA, 24mA
  • Trigger Type
    Positive Edge
  • Max Propagation Delay @ V, Max CL
    10.5ns @ 5V, 50pF
  • Clock Frequency
    150 MHz
  • Number of Bits per Element
    8
  • Number of Elements
    1
  • Output Type
    Tri-State, Inverted
  • Type
    D-Type
  • Function
    Standard
  • Packaging
    Tube
  • Packaging
    Bulk
  • Product Status
    Active
  • Series
    74AC
The SN74AC534N is a specific integrated circuit (IC) chip manufactured by Texas Instruments. It is an octal D-type flip-flop with 3-state outputs. Here are some advantages and application scenarios of the SN74AC534N:Advantages: 1. High-speed operation: The SN74AC534N operates at high speeds, making it suitable for applications that require fast data processing and transfer.2. 3-state outputs: The chip's 3-state outputs allow for efficient bus sharing and interfacing with other devices. This feature enables multiple chips to be connected to a common bus without interfering with each other.3. Wide operating voltage range: The SN74AC534N can operate within a wide voltage range, typically between 2V and 6V. This flexibility makes it compatible with various power supply configurations.Application scenarios: 1. Data storage and transfer: The flip-flop functionality of the SN74AC534N makes it useful for applications that involve data storage and transfer. It can be used in registers, counters, and other digital systems where data needs to be stored and processed.2. Address decoding: The chip's 3-state outputs can be utilized for address decoding in memory systems. It allows multiple memory devices to share a common bus while enabling the selection of specific devices for read or write operations.3. Control signal generation: The SN74AC534N can be employed to generate control signals in digital systems. It can be used to synchronize and control the timing of various components, ensuring proper operation and coordination.4. Bus interface: The chip's ability to interface with other devices via its 3-state outputs makes it suitable for bus-based systems. It can be used to connect multiple devices to a shared bus, facilitating communication and data exchange.It's important to note that while these advantages and application scenarios are commonly associated with the SN74AC534N, the specific implementation and usage may vary depending on the requirements of the overall system design.
SN74AC534N Relevant information