Home / Flip Flops / SN74ABT574ADBR/
SN74ABT574ADBR

SN74ABT574ADBR

Manufacturer No:

SN74ABT574ADBR

Manufacturer:

Texas Instruments

Description:

IC FF D-TYPE SNGL 8BIT 20SSOP

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

SN74ABT574ADBR Specifications

  • Type
    Parameter
  • Package / Case
    20-SSOP (0.209", 5.30mm Width)
  • Supplier Device Package
    20-SSOP
  • Mounting Type
    Surface Mount
  • Operating Temperature
    -40°C ~ 85°C (TA)
  • Input Capacitance
    3.5 pF
  • Current - Quiescent (Iq)
    250 µA
  • Voltage - Supply
    4.5V ~ 5.5V
  • Current - Output High, Low
    32mA, 64mA
  • Trigger Type
    Positive Edge
  • Max Propagation Delay @ V, Max CL
    6.6ns @ 5V, 50pF
  • Clock Frequency
    200 MHz
  • Number of Bits per Element
    8
  • Number of Elements
    1
  • Output Type
    Tri-State, Non-Inverted
  • Type
    D-Type
  • Function
    Standard
  • Packaging
    Cut Tape (CT)
  • Packaging
    Tape & Reel (TR)
  • Product Status
    Active
  • Series
    74ABT
The SN74ABT574ADBR is a specific integrated circuit chip manufactured by Texas Instruments. It is an octal D-type flip-flop with 3-state outputs. Here are some advantages and application scenarios of this chip:Advantages: 1. High-speed operation: The SN74ABT574ADBR chip is designed for high-speed applications, making it suitable for use in systems that require fast data transfer and processing.2. 3-state outputs: The chip's 3-state outputs allow for easy interfacing with other devices and systems. This feature enables multiple chips to be connected together without causing conflicts or bus contention.3. Wide operating voltage range: The chip can operate within a wide voltage range, typically between 4.5V and 5.5V. This flexibility makes it compatible with various power supply configurations.Application scenarios: 1. Data storage and transfer: The SN74ABT574ADBR chip can be used in applications that require data storage and transfer, such as memory systems, registers, and data buses. Its flip-flop design allows for the storage and synchronization of data.2. Address decoding: The chip can be used in address decoding circuits, which are commonly found in microprocessors and memory systems. It helps in selecting specific memory locations or peripheral devices based on the address signals received.3. Bus interfacing: The 3-state outputs of the chip make it suitable for bus interfacing applications. It can be used to connect multiple devices to a common bus, allowing for efficient data transfer and communication.4. Control and synchronization: The chip can be used in control and synchronization circuits, where it helps in coordinating the timing and sequencing of various signals and operations.It's important to note that the specific advantages and application scenarios of the SN74ABT574ADBR chip may vary depending on the requirements of the system or project it is being used in. It is always recommended to refer to the chip's datasheet and consult with technical experts for detailed information and guidance.
SN74ABT574ADBR Relevant information