Home / Flip Flops / SN74HCT374DBLE/
SN74HCT374DBLE

SN74HCT374DBLE

Manufacturer No:

SN74HCT374DBLE

Manufacturer:

Texas Instruments

Description:

IC FF D-TYPE SNGL 8BIT 20SSOP

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

SN74HCT374DBLE Specifications

  • Type
    Parameter
  • Package / Case
    20-SSOP (0.209", 5.30mm Width)
  • Supplier Device Package
    20-SSOP
  • Mounting Type
    Surface Mount
  • Operating Temperature
    -40°C ~ 85°C (TA)
  • Input Capacitance
    3 pF
  • Current - Quiescent (Iq)
    8 µA
  • Voltage - Supply
    4.5V ~ 5.5V
  • Current - Output High, Low
    6mA, 6mA
  • Trigger Type
    Positive Edge
  • Max Propagation Delay @ V, Max CL
    32ns @ 5.5V, 50pF
  • Clock Frequency
    40 MHz
  • Number of Bits per Element
    8
  • Number of Elements
    1
  • Output Type
    Tri-State, Non-Inverted
  • Type
    D-Type
  • Function
    Standard
  • Packaging
    Bulk
  • Product Status
    Active
  • Series
    74HCT
The SN74HCT374DBLE is a specific integrated circuit (IC) chip manufactured by Texas Instruments. It is a high-speed octal D-type flip-flop with 3-state outputs. Here are some advantages and application scenarios of this chip:Advantages: 1. High-speed operation: The SN74HCT374DBLE chip operates at high speeds, making it suitable for applications that require fast data transfer and processing.2. 3-state outputs: The chip has 3-state outputs, which means it can be set to high impedance, allowing multiple devices to share a common bus without interfering with each other.3. Wide operating voltage range: The chip can operate within a wide voltage range, typically from 4.5V to 5.5V, making it compatible with various power supply systems.Application scenarios: 1. Data storage and transfer: The SN74HCT374DBLE chip can be used in applications where data needs to be stored and transferred, such as in microcontrollers, data registers, and memory systems.2. Address decoding: It can be used in address decoding circuits to enable or disable specific memory or peripheral devices based on the address signals received.3. Bus interfacing: The chip's 3-state outputs make it suitable for bus interfacing applications, where multiple devices need to share a common data bus.4. Clock synchronization: The chip can be used to synchronize data transfers between different components or subsystems in a digital system.It's important to note that the specific advantages and application scenarios of the SN74HCT374DBLE chip may vary depending on the requirements of the project or system it is being used in. It's always recommended to consult the chip's datasheet and application notes for detailed information and guidelines.
SN74HCT374DBLE Relevant information