Home / Counters, Dividers / SN74ALS869DWR/
SN74ALS869DWR

SN74ALS869DWR

Manufacturer No:

SN74ALS869DWR

Manufacturer:

Texas Instruments

Description:

IC BINARY COUNTER 8-BIT 24SOIC

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

SN74ALS869DWR Specifications

  • Type
    Parameter
  • Supplier Device Package
    24-SOIC
  • Package / Case
    24-SOIC (0.295", 7.50mm Width)
  • Mounting Type
    Surface Mount
  • Operating Temperature
    0°C ~ 70°C
  • Voltage - Supply
    4.5 V ~ 5.5 V
  • Trigger Type
    Positive Edge
  • Count Rate
    35 MHz
  • Timing
    Synchronous
  • Reset
    Synchronous
  • Number of Bits per Element
    8
  • Number of Elements
    1
  • Direction
    Up, Down
  • Logic Type
    Binary Counter
  • Packaging
    Tape & Reel (TR)
  • Product Status
    Obsolete
  • Series
    74ALS
The SN74ALS869DWR is a specific integrated circuit (IC) chip manufactured by Texas Instruments. It is a 16-bit bus transceiver with 3-state outputs, designed for high-speed digital systems. Some advantages and application scenarios of this IC chip are as follows:Advantages: 1. High-speed operation: The SN74ALS869DWR is designed to operate at high speeds, making it suitable for applications that require fast data transfer and processing. 2. 3-state outputs: The IC chip has 3-state outputs, which means it can be put into a high-impedance state, allowing multiple devices to share a common bus without interfering with each other. 3. Wide operating voltage range: The chip can operate within a wide voltage range, typically between 4.5V and 5.5V, making it compatible with various digital systems. 4. Low power consumption: The IC chip is designed to consume low power, making it suitable for battery-powered devices or applications where power efficiency is crucial.Application scenarios: 1. Data communication systems: The SN74ALS869DWR can be used in various data communication systems, such as networking equipment, routers, switches, and data storage devices, where high-speed data transfer is required. 2. Microprocessor interfacing: The IC chip can be used to interface microprocessors with other devices or peripherals, allowing for efficient data transfer and control. 3. Bus systems: It can be used in bus systems, where multiple devices need to communicate with each other over a shared bus. The 3-state outputs allow for easy bus sharing and control. 4. Industrial automation: The IC chip can be used in industrial automation systems, where high-speed data transfer and control are required for efficient operation. 5. Test and measurement equipment: It can be used in test and measurement equipment, such as oscilloscopes or logic analyzers, to interface with digital signals and perform data analysis.These are just a few examples of the advantages and application scenarios of the SN74ALS869DWR IC chip. The specific usage will depend on the requirements of the system or application it is being used in.
SN74ALS869DWR Relevant information