Home / Counters, Dividers / SN74LS593N/
SN74LS593N

SN74LS593N

Manufacturer No:

SN74LS593N

Manufacturer:

Texas Instruments

Description:

IC BINARY COUNTER 8-BIT 20DIP

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

SN74LS593N Specifications

  • Type
    Parameter
  • Supplier Device Package
    20-PDIP
  • Package / Case
    20-DIP (0.300", 7.62mm)
  • Mounting Type
    Through Hole
  • Operating Temperature
    0°C ~ 70°C
  • Voltage - Supply
    4.75 V ~ 5.25 V
  • Trigger Type
    Positive Edge
  • Count Rate
    35 MHz
  • Timing
    -
  • Reset
    Synchronous
  • Number of Bits per Element
    8
  • Number of Elements
    1
  • Direction
    Up
  • Logic Type
    Binary Counter
  • Packaging
    Tube
  • Packaging
    Bulk
  • Product Status
    Active
  • Series
    74LS
The SN74LS593N is a 8-bit binary counter with input/output expansion capabilities. Some advantages and application scenarios of this integrated circuit chip are:Advantages: 1. Binary Counter: The SN74LS593N can be used to count binary values, providing a sequential output from 0 to 255 (2^8 - 1). 2. Input/Output Expansion: It has additional inputs and outputs that allow for expanding the capabilities of the circuit. Multiple chips can be cascaded together for a higher bit count or to interface with more devices. 3. Datasheet Availability: Being a popular and commonly used chip, the datasheet is readily available, providing detailed information on its pin configuration, electrical characteristics, and recommended usage.Application Scenarios: 1. Digital Counting: The SN74LS593N can be used in digital counting applications such as timers, frequency dividers, and event counters. 2. Digital Displays and LED Arrays: It can be employed to drive digital displays and LED arrays by converting binary values to the corresponding display segments or LED configurations. 3. Address Decoding: The chip can be used to expand the address decoding capabilities of a microprocessor system by providing additional address lines. 4. Parallel-to-Serial Data Conversion: Using the additional inputs and outputs, the chip can be utilized in parallel-to-serial data conversion applications, where parallel data is converted into serial format. 5. Input/Output Expansion: By cascading multiple SN74LS593N chips, the number of input/output lines can be expanded, making it useful for interfacing with multiple devices in microcontroller or microprocessor-based systems.It is important to note that the specific advantages and application scenarios may vary depending on the requirements and design of a particular project.
SN74LS593N Relevant information