Home / Buffers, Drivers, Receivers, Transceivers / 74ABT541D,623/
74ABT541D,623

74ABT541D,623

Manufacturer No:

74ABT541D,623

Manufacturer:

NXP USA Inc.

Description:

IC BUFFER NON-INVERT 5.5V 20SO

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

74ABT541D,623 Specifications

  • Type
    Parameter
  • Supplier Device Package
    20-SO
  • Package / Case
    20-SOIC (0.295", 7.50mm Width)
  • Mounting Type
    Surface Mount
  • Operating Temperature
    -40°C ~ 85°C (TA)
  • Voltage - Supply
    4.5V ~ 5.5V
  • Current - Output High, Low
    32mA, 64mA
  • Output Type
    3-State
  • Input Type
    -
  • Number of Bits per Element
    8
  • Number of Elements
    1
  • Logic Type
    Buffer, Non-Inverting
  • Packaging
    Tape & Reel (TR)
  • Product Status
    Obsolete
  • Series
    74ABT
The 74ABT541D and 623 are both integrated circuit chips that serve different purposes and have different advantages and application scenarios.Advantages and Application Scenarios of 74ABT541D: 1. High-speed operation: The 74ABT541D is designed for high-speed operation, making it suitable for applications that require fast data transfer. 2. Low power consumption: It has low power consumption characteristics, making it suitable for battery-powered devices or applications where power efficiency is crucial. 3. Bidirectional buffer: The 74ABT541D is a bidirectional buffer, meaning it can be used to interface between two systems or devices that operate at different voltage levels or have different signal directions. 4. Output enable control: It has an output enable pin that allows the user to control the output state, making it suitable for applications where the output needs to be enabled or disabled based on certain conditions. 5. Noise immunity: The 74ABT541D has good noise immunity, making it suitable for applications where noise or interference is a concern.Application scenarios for 74ABT541D: 1. Level shifting: It can be used to shift the voltage levels between different logic families or systems, allowing them to communicate with each other. 2. Bus drivers: It can be used as a bus driver to buffer and amplify signals on a data bus, ensuring reliable and efficient data transfer. 3. Interfacing different voltage domains: It can be used to interface between devices or systems that operate at different voltage levels, ensuring proper signal translation and compatibility.Advantages and Application Scenarios of 623: 1. Low power consumption: The 623 is designed for low power consumption, making it suitable for battery-powered devices or applications where power efficiency is crucial. 2. High input impedance: It has a high input impedance, making it suitable for applications where the input signal source has a high impedance or limited driving capability. 3. Wide input voltage range: The 623 has a wide input voltage range, allowing it to accept a variety of input signal levels. 4. Rail-to-rail output swing: It provides a rail-to-rail output swing, meaning the output voltage can reach close to the supply voltage rails, making it suitable for applications that require a wide output voltage range. 5. Small package size: The 623 is available in small package sizes, making it suitable for space-constrained applications.Application scenarios for 623: 1. Sensor interfaces: It can be used to interface with various sensors that have high impedance outputs, such as temperature sensors, pressure sensors, or light sensors. 2. Signal conditioning: It can be used for signal conditioning or amplification in low-power analog circuits. 3. Portable devices: It can be used in portable devices, such as smartphones or wearables, where low power consumption and small package size are important factors.
74ABT541D,623 Relevant information