Home / Buffers, Drivers, Receivers, Transceivers / 74ABT646ADB,112/
74ABT646ADB,112

74ABT646ADB,112

Manufacturer No:

74ABT646ADB,112

Manufacturer:

NXP USA Inc.

Description:

IC TXRX NON-INVERT 5.5V 24SSOP

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

74ABT646ADB,112 Specifications

  • Type
    Parameter
  • Supplier Device Package
    24-SSOP
  • Package / Case
    24-SSOP (0.209", 5.30mm Width)
  • Mounting Type
    Surface Mount
  • Operating Temperature
    -40°C ~ 85°C (TA)
  • Voltage - Supply
    4.5V ~ 5.5V
  • Current - Output High, Low
    32mA, 64mA
  • Output Type
    3-State
  • Input Type
    -
  • Number of Bits per Element
    8
  • Number of Elements
    1
  • Logic Type
    Transceiver, Non-Inverting
  • Packaging
    Tube
  • Product Status
    Obsolete
  • Series
    74ABT
The 74ABT646ADB,112 is a specific integrated circuit chip that belongs to the 74ABT series. It is an octal bus transceiver with 3-state outputs. Here are the advantages and application scenarios of this chip:Advantages: 1. High-speed operation: The 74ABT646ADB,112 chip is designed for high-speed operation, making it suitable for applications that require fast data transfer. 2. 3-state outputs: The chip has 3-state outputs, which means it can be disabled or put into a high-impedance state when not in use. This feature allows multiple devices to share a common bus without interfering with each other. 3. Bidirectional data transfer: The chip supports bidirectional data transfer, allowing data to be transmitted in both directions on the bus. 4. Wide operating voltage range: The chip can operate within a wide voltage range, typically from 4.5V to 5.5V, making it compatible with various power supply systems.Application scenarios: 1. Data communication systems: The 74ABT646ADB,112 chip can be used in data communication systems where fast and bidirectional data transfer is required. It can be used to interface between different subsystems or devices, ensuring efficient data exchange. 2. Bus systems: The chip is commonly used in bus systems, such as address buses or data buses, where multiple devices need to share a common communication channel. Its 3-state outputs allow devices to be connected or disconnected from the bus as needed. 3. Memory systems: The chip can be used in memory systems to facilitate data transfer between memory modules and other components of a system. It can act as a buffer or transceiver, ensuring reliable and efficient data transmission. 4. Industrial automation: The high-speed operation and bidirectional data transfer capabilities of the chip make it suitable for industrial automation applications. It can be used in control systems, PLCs (Programmable Logic Controllers), or other industrial devices that require fast and reliable data communication.It's important to note that the specific application scenarios may vary depending on the overall system requirements and design.
74ABT646ADB,112 Relevant information