Home / Buffers, Drivers, Receivers, Transceivers / SN74F543DWG4/
SN74F543DWG4

SN74F543DWG4

Manufacturer No:

SN74F543DWG4

Manufacturer:

Texas Instruments

Description:

IC TXRX NON-INVERT 5.5V 24SOIC

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

SN74F543DWG4 Specifications

  • Type
    Parameter
  • Supplier Device Package
    24-SOIC
  • Package / Case
    24-SOIC (0.295", 7.50mm Width)
  • Mounting Type
    Surface Mount
  • Operating Temperature
    0°C ~ 70°C (TA)
  • Voltage - Supply
    4.5V ~ 5.5V
  • Current - Output High, Low
    3mA, 24mA; 15mA, 64mA
  • Output Type
    3-State
  • Input Type
    -
  • Number of Bits per Element
    8
  • Number of Elements
    1
  • Logic Type
    Transceiver, Non-Inverting
  • Packaging
    Tube
  • Product Status
    Last Time Buy
  • Series
    74F
The SN74F543DWG4 is a specific integrated circuit (IC) chip manufactured by Texas Instruments. It is an octal bus transceiver with 3-state outputs, designed for use in various digital systems. Here are some advantages and application scenarios of the SN74F543DWG4:Advantages: 1. High-speed operation: The SN74F543DWG4 is designed to operate at high speeds, making it suitable for applications that require fast data transfer.2. Bidirectional data flow: This IC chip supports bidirectional data transfer, allowing data to be transmitted in both directions on the bus.3. 3-state outputs: The 3-state outputs enable the chip to be connected to a shared bus, where multiple devices can drive the bus lines without interfering with each other.4. Wide operating voltage range: The SN74F543DWG4 can operate within a wide voltage range, making it compatible with various digital systems.Application scenarios: 1. Data communication systems: The SN74F543DWG4 can be used in systems that require the transfer of data between different components or subsystems. Its bidirectional data flow and high-speed operation make it suitable for applications such as data buses, communication interfaces, and networking equipment.2. Microprocessor systems: This IC chip can be employed in microprocessor-based systems to facilitate data transfer between the microprocessor and other peripherals. It can be used to connect the microprocessor to memory modules, input/output devices, and other components.3. Industrial automation: The SN74F543DWG4 can be utilized in industrial automation systems, where it can help in the exchange of data between various control units, sensors, and actuators. Its high-speed operation and bidirectional data flow make it suitable for real-time control applications.4. Embedded systems: This IC chip can be integrated into embedded systems, such as automotive electronics, consumer electronics, and medical devices. It can facilitate data transfer between different subsystems within these systems, enabling efficient communication and control.It's important to note that the specific advantages and application scenarios of the SN74F543DWG4 may vary depending on the requirements of the system and the overall design considerations. It is always recommended to consult the datasheet and application notes provided by the manufacturer for detailed information and guidelines on using the IC chip effectively.
SN74F543DWG4 Relevant information