Home / Buffers, Drivers, Receivers, Transceivers / SN74ABT646DWR/
SN74ABT646DWR

SN74ABT646DWR

Manufacturer No:

SN74ABT646DWR

Manufacturer:

Texas Instruments

Description:

IC TXRX NON-INVERT 5.5V 24SOIC

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

SN74ABT646DWR Specifications

  • Type
    Parameter
  • Supplier Device Package
    24-SOIC
  • Package / Case
    24-SOIC (0.295", 7.50mm Width)
  • Mounting Type
    Surface Mount
  • Operating Temperature
    -40°C ~ 85°C (TA)
  • Voltage - Supply
    4.5V ~ 5.5V
  • Current - Output High, Low
    32mA, 64mA
  • Output Type
    3-State
  • Input Type
    -
  • Number of Bits per Element
    8
  • Number of Elements
    1
  • Logic Type
    Transceiver, Non-Inverting
  • Packaging
    Bulk
  • Packaging
    Tape & Reel (TR)
  • Product Status
    Active
  • Series
    74ABT
The SN74ABT646DWR is a specific integrated circuit chip manufactured by Texas Instruments. It is a bus transceiver with 3-state outputs, which means it can facilitate bidirectional data transfer between two buses. Here are some advantages and application scenarios of this chip:Advantages: 1. Bidirectional Data Transfer: The SN74ABT646DWR allows data to be transferred in both directions, making it suitable for applications where data needs to be exchanged between two buses.2. 3-State Outputs: The chip has 3-state outputs, which means it can be disabled or put into a high-impedance state. This feature allows multiple devices to share a bus without interfering with each other.3. High-Speed Operation: The SN74ABT646DWR operates at high speeds, making it suitable for applications that require fast data transfer.Application Scenarios: 1. Bus Interfacing: The chip can be used to interface between two buses with different voltage levels or protocols. It enables data exchange between systems that use different communication standards.2. Memory Systems: The SN74ABT646DWR can be used in memory systems to facilitate data transfer between the memory and other components, such as processors or input/output devices.3. Data Communication: It can be used in communication systems to enable bidirectional data transfer between different modules or subsystems.4. Industrial Automation: The chip can be utilized in industrial automation applications where data needs to be exchanged between different control systems or devices.5. Networking Equipment: It can be employed in networking equipment, such as routers or switches, to enable data transfer between different network interfaces.It's important to note that the specific application of the SN74ABT646DWR chip may vary depending on the requirements of the system and the designer's implementation. It's always recommended to consult the chip's datasheet and application notes for detailed information and guidelines.
SN74ABT646DWR Relevant information