Home / Buffers, Drivers, Receivers, Transceivers / MC74ACT652N/
MC74ACT652N

MC74ACT652N

Manufacturer No:

MC74ACT652N

Manufacturer:

onsemi

Description:

IC TXRX NON-INVERT 5.5V 24DIP

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

MC74ACT652N Specifications

  • Type
    Parameter
  • Supplier Device Package
    24-PDIP
  • Package / Case
    24-DIP (0.300", 7.62mm)
  • Mounting Type
    Through Hole
  • Operating Temperature
    -40°C ~ 85°C (TA)
  • Voltage - Supply
    4.5V ~ 5.5V
  • Current - Output High, Low
    24mA, 24mA
  • Output Type
    3-State
  • Input Type
    -
  • Number of Bits per Element
    8
  • Number of Elements
    1
  • Logic Type
    Transceiver, Non-Inverting
  • Packaging
    Tube
  • Packaging
    Tube
  • Product Status
    Obsolete
  • Series
    74ACT
The MC74ACT652N is an integrated circuit chip that belongs to the 74ACT family of devices. It is an octal transceiver with 3-state outputs, meaning it can both transmit and receive data between two systems. Here are some advantages and application scenarios of the MC74ACT652N:Advantages: 1. High-speed operation: The MC74ACT652N operates at a high-speed, making it suitable for applications that require fast data transmission. 2. 3-state outputs: The chip has 3-state outputs, which means it can be disabled or put into a high-impedance state when not actively transmitting or receiving data. This feature allows multiple devices to share a common bus without interfering with each other. 3. Wide operating voltage range: The chip can operate within a wide voltage range, typically between 4.5V and 5.5V, making it compatible with various systems and power supplies. 4. Low power consumption: The MC74ACT652N is designed to consume low power, making it energy-efficient and suitable for battery-powered devices.Application scenarios: 1. Data communication: The MC74ACT652N can be used in various data communication applications, such as serial or parallel data transmission between different systems or devices. 2. Bus interfacing: It is commonly used for interfacing between different buses or systems, allowing data to be transferred between them. 3. Memory systems: The chip can be used in memory systems to enable data transfer between the memory and other components of a system. 4. Industrial automation: The MC74ACT652N can be utilized in industrial automation systems where data needs to be transmitted and received between different control units or devices. 5. Networking equipment: It can be employed in networking equipment, such as routers or switches, to facilitate data transmission between different network interfaces.These are just a few examples of the advantages and application scenarios of the MC74ACT652N integrated circuit chip. The specific usage will depend on the requirements of the system or application it is being used in.
MC74ACT652N Relevant information