Home / Comparators / MCP6541-E/P/
MCP6541-E/P

MCP6541-E/P

Manufacturer No:

MCP6541-E/P

Manufacturer:

Microchip Technology

Description:

IC COMPARATOR 1 GEN PUR 8DIP

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

MCP6541-E/P Specifications

  • Type
    Parameter
  • Supplier Device Package
    8-PDIP
  • Mounting Type
    Through Hole
  • Package / Case
    8-DIP (0.300", 7.62mm)
  • Operating Temperature
    -40°C ~ 125°C
  • Hysteresis
    6.5mV
  • Propagation Delay (Max)
    8µs
  • CMRR, PSRR (Typ)
    70dB CMRR, 80dB PSRR
  • Current - Quiescent (Max)
    1µA
  • Current - Output (Typ)
    30mA
  • Current - Input Bias (Max)
    1pA @ 5.5V
  • Voltage - Input Offset (Max)
    7mV @ 5.5V
  • Voltage - Supply, Single/Dual (±)
    1.6V ~ 5.5V
  • Output Type
    CMOS, Push-Pull, Rail-to-Rail, TTL
  • Number of Elements
    1
  • Type
    General Purpose
  • Packaging
    Tube
  • Product Status
    Active
  • Series
    -
The MCP6541-E/P is a single-channel, open-drain output comparator integrated circuit chip. It offers several advantages and can be used in various application scenarios. Here are some of its advantages and application scenarios:Advantages: 1. Low power consumption: The MCP6541-E/P operates at a low supply voltage range of 1.6V to 5.5V, making it suitable for battery-powered applications where power efficiency is crucial. 2. Rail-to-rail input and output: It has rail-to-rail input and output capability, allowing it to operate with signals close to the supply voltage rails, maximizing the dynamic range and accuracy of the comparator. 3. Open-drain output: The open-drain output configuration enables easy interfacing with other digital devices, such as microcontrollers or logic gates, by providing flexibility in setting the output voltage levels. 4. Fast response time: The MCP6541-E/P has a fast response time of 8 μs, making it suitable for applications requiring quick decision-making based on input signals.Application Scenarios: 1. Battery-powered devices: The low power consumption and wide supply voltage range of the MCP6541-E/P make it ideal for use in portable and battery-powered devices, such as smartphones, wearables, and IoT devices. 2. Level shifting and interfacing: The open-drain output configuration allows the MCP6541-E/P to be used for level shifting and interfacing between different voltage domains. It can be used to convert logic levels between different voltage levels, enabling communication between devices with different voltage requirements. 3. Signal monitoring and detection: The fast response time and rail-to-rail input capability make the MCP6541-E/P suitable for signal monitoring and detection applications. It can be used to detect threshold crossings, monitor voltage levels, or trigger actions based on specific signal conditions. 4. Power management: The MCP6541-E/P can be used in power management circuits to monitor and control power supply voltages. It can be used to detect undervoltage or overvoltage conditions and trigger appropriate actions, such as shutting down or enabling power supplies.These are just a few examples of the advantages and application scenarios of the MCP6541-E/P integrated circuit chip. Its versatility and features make it suitable for a wide range of applications where low power consumption, rail-to-rail operation, open-drain output, and fast response time are required.
MCP6541-E/P Relevant information