Home / Comparators / TL712CPSRG4/
TL712CPSRG4

TL712CPSRG4

Manufacturer No:

TL712CPSRG4

Manufacturer:

Texas Instruments

Description:

IC COMPARATOR 1 DIFF 8SO

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

TL712CPSRG4 Specifications

  • Type
    Parameter
  • Supplier Device Package
    8-SO
  • Mounting Type
    Surface Mount
  • Package / Case
    8-SOIC (0.209", 5.30mm Width)
  • Operating Temperature
    0°C ~ 70°C
  • Hysteresis
    5mV
  • Propagation Delay (Max)
    25ns
  • CMRR, PSRR (Typ)
    -
  • Current - Quiescent (Max)
    20mA
  • Current - Output (Typ)
    -
  • Current - Input Bias (Max)
    -
  • Voltage - Input Offset (Max)
    -
  • Voltage - Supply, Single/Dual (±)
    4.75V ~ 5.25V
  • Output Type
    Complementary, Push-Pull, Tri-State, TTL
  • Number of Elements
    1
  • Type
    Differential
  • Packaging
    Tape & Reel (TR)
  • Product Status
    Discontinued at Digi-Key
  • Series
    -
The TL712CPSRG4 is a specific integrated circuit (IC) chip manufactured by Texas Instruments. It is a dual operational amplifier with rail-to-rail input and output capabilities. Some advantages and application scenarios of the TL712CPSRG4 IC chip are:Advantages: 1. Rail-to-rail input and output: The TL712CPSRG4 can operate with input and output signals that span the entire supply voltage range, allowing for maximum utilization of the available voltage range. 2. Low power consumption: This IC chip is designed to consume low power, making it suitable for battery-powered applications or situations where power efficiency is crucial. 3. Wide supply voltage range: The TL712CPSRG4 can operate with a wide range of supply voltages, typically from 2.7V to 12V, providing flexibility in various applications. 4. High output current: It can deliver a relatively high output current, making it suitable for driving capacitive loads or other applications that require higher current capabilities.Application scenarios: 1. Portable devices: The low power consumption and wide supply voltage range make the TL712CPSRG4 suitable for use in portable devices such as smartphones, tablets, portable audio players, or wearable devices. 2. Sensor interfaces: The rail-to-rail input and output capabilities of this IC chip make it suitable for sensor interface applications, where accurate signal conditioning and amplification are required. 3. Battery-powered systems: Due to its low power consumption, the TL712CPSRG4 can be used in battery-powered systems, such as wireless sensor networks, remote monitoring systems, or IoT devices. 4. Audio amplification: The high output current capability of this IC chip makes it suitable for audio amplification applications, such as headphone amplifiers, audio mixers, or portable speakers. 5. Industrial control systems: The TL712CPSRG4 can be used in various industrial control systems, such as motor control, process control, or instrumentation, where accurate signal processing and amplification are necessary.It is important to note that the specific advantages and application scenarios of the TL712CPSRG4 IC chip may vary depending on the requirements and specifications of the particular application.
TL712CPSRG4 Relevant information