Home / Comparators / TLV3402IDGKG4/
TLV3402IDGKG4

TLV3402IDGKG4

Manufacturer No:

TLV3402IDGKG4

Manufacturer:

Texas Instruments

Description:

IC COMPARATOR 2 GEN PUR 8VSSOP

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

TLV3402IDGKG4 Specifications

  • Type
    Parameter
  • Supplier Device Package
    8-VSSOP
  • Mounting Type
    Surface Mount
  • Package / Case
    8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
  • Operating Temperature
    -40°C ~ 125°C
  • Hysteresis
    -
  • Propagation Delay (Max)
    300µs
  • CMRR, PSRR (Typ)
    88dB CMRR, 105dB PSRR
  • Current - Quiescent (Max)
    950nA
  • Current - Output (Typ)
    10mA
  • Current - Input Bias (Max)
    250pA @ 15V
  • Voltage - Input Offset (Max)
    3.6mV @ 15V
  • Voltage - Supply, Single/Dual (±)
    2.7V ~ 16V, ±1.35V ~ 8V
  • Output Type
    CMOS, Open-Drain
  • Number of Elements
    2
  • Type
    General Purpose
  • Packaging
    Tube
  • Product Status
    Discontinued at Digi-Key
  • Series
    -
The TLV3402IDGKG4 is a dual comparator integrated circuit chip manufactured by Texas Instruments. It offers several advantages and can be applied in various scenarios. Some of the advantages and application scenarios of the TLV3402IDGKG4 are:Advantages: 1. Low Power Consumption: The TLV3402IDGKG4 operates at a low supply voltage range of 2 V to 36 V, making it suitable for low-power applications. 2. Rail-to-Rail Inputs and Outputs: It provides rail-to-rail input and output voltage ranges, allowing it to work with signals close to the supply voltage rails. 3. High-Speed Performance: With a response time of 1.3 μs, the TLV3402IDGKG4 is capable of fast switching and high-speed applications. 4. Wide Temperature Range: It can operate in a wide temperature range of -40°C to 125°C, making it suitable for various environmental conditions. 5. Small Package Size: The TLV3402IDGKG4 is available in a small 8-pin VSSOP package, which saves board space and enables compact designs.Application Scenarios: 1. Battery-Powered Devices: The low power consumption and wide supply voltage range make the TLV3402IDGKG4 suitable for battery-powered devices such as portable electronics, IoT devices, and wearables. 2. Industrial Automation: The high-speed performance and wide temperature range make it suitable for industrial automation applications like motor control, robotics, and process control. 3. Automotive Electronics: The TLV3402IDGKG4 can be used in automotive applications such as vehicle control systems, battery management, and safety systems due to its wide temperature range and robustness. 4. Power Management: It can be utilized in power management circuits for overvoltage and undervoltage protection, power supply sequencing, and fault detection. 5. Signal Conditioning: The rail-to-rail inputs and outputs of the TLV3402IDGKG4 make it suitable for signal conditioning applications like level shifting, threshold detection, and signal amplification.It is important to note that the TLV3402IDGKG4's specific advantages and application scenarios may vary depending on the requirements and specifications of the project.
TLV3402IDGKG4 Relevant information