Home / Comparators / MAX9039BEBT+TCFF/
MAX9039BEBT+TCFF

MAX9039BEBT+TCFF

Manufacturer No:

MAX9039BEBT+TCFF

Description:

IC COMPARATOR 1 W/VOLT REF 6WLP

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

MAX9039BEBT+TCFF Specifications

  • Type
    Parameter
  • Supplier Device Package
    6-WLP
  • Mounting Type
    Surface Mount
  • Package / Case
    6-WFBGA, WLBGA
  • Operating Temperature
    -40°C ~ 85°C
  • Hysteresis
    ±3mV
  • Propagation Delay (Max)
    450ns (Typ)
  • CMRR, PSRR (Typ)
    80dB CMRR, 80dB PSRR
  • Current - Quiescent (Max)
    100µA
  • Current - Output (Typ)
    95mA @ 5V
  • Current - Input Bias (Max)
    0.025µA @ 5V
  • Voltage - Input Offset (Max)
    9mV @ 5V
  • Voltage - Supply, Single/Dual (±)
    2.5V ~ 5.5V
  • Output Type
    CMOS, Push-Pull, Rail-to-Rail
  • Number of Elements
    1
  • Type
    with Voltage Reference
  • Packaging
    Tape & Reel (TR)
  • Product Status
    Active
  • Series
    -
The MAX9039BEBT+TCFF is a specific model of integrated circuit (IC) chip manufactured by Maxim Integrated. It is a high-speed, low-power comparator with a push-pull output. Here are some advantages and application scenarios of this IC chip:Advantages: 1. High-speed operation: The MAX9039BEBT+TCFF is designed for high-speed applications, with a propagation delay of only 4ns. This makes it suitable for applications that require fast response times. 2. Low-power consumption: This IC chip operates at a low supply voltage (1.8V to 5.5V) and consumes very low quiescent current (typically 1.5μA). It is ideal for battery-powered or low-power applications. 3. Wide input voltage range: The MAX9039BEBT+TCFF can accept a wide range of input voltages, from -0.3V to VCC+0.3V. This flexibility allows it to be used in various voltage level shifting and signal conditioning applications. 4. Push-pull output: The IC chip has a push-pull output stage, which means it can both source and sink current. This feature enables it to directly drive capacitive loads and interface with other digital logic circuits.Application scenarios: 1. Signal conditioning: The MAX9039BEBT+TCFF can be used in applications where the input signal needs to be conditioned or amplified before further processing. For example, it can be used as a level shifter to convert a low-voltage signal to a higher voltage level. 2. High-speed data acquisition: Due to its high-speed operation, this IC chip is suitable for high-speed data acquisition systems. It can be used to compare and process analog signals in applications such as data communication, instrumentation, or data logging. 3. Battery-powered devices: The low-power consumption of the MAX9039BEBT+TCFF makes it suitable for battery-powered devices, such as portable electronics or IoT devices. It helps to extend the battery life by minimizing power consumption. 4. Industrial automation: The high-speed and low-power characteristics of this IC chip make it suitable for various industrial automation applications. It can be used in control systems, motor control, robotics, or sensing applications where fast and accurate signal processing is required.It's important to note that the specific advantages and application scenarios may vary depending on the requirements of the overall system and the specific use case. It is recommended to refer to the datasheet and consult with the manufacturer for detailed information and guidance on using the MAX9039BEBT+TCFF IC chip.
MAX9039BEBT+TCFF Relevant information