Home / Comparators / MAX993EUD+/
MAX993EUD+

MAX993EUD+

Manufacturer No:

MAX993EUD+

Description:

IC COMPARATOR 4 GEN PUR 14TSSOP

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

MAX993EUD+ Specifications

  • Type
    Parameter
  • Supplier Device Package
    14-TSSOP
  • Mounting Type
    Surface Mount
  • Package / Case
    14-TSSOP (0.173", 4.40mm Width)
  • Operating Temperature
    -40°C ~ 85°C
  • Hysteresis
    ±3mV
  • Propagation Delay (Max)
    450ns
  • CMRR, PSRR (Typ)
    80dB CMRR, 80dB PSRR
  • Current - Quiescent (Max)
    24µA
  • Current - Output (Typ)
    -
  • Current - Input Bias (Max)
    1pA @ 5.5V
  • Voltage - Input Offset (Max)
    5mV @ 5.5V
  • Voltage - Supply, Single/Dual (±)
    2.5V ~ 5.5V, ±1.25V ~ 2.75V
  • Output Type
    CMOS, Push-Pull, Rail-to-Rail, TTL
  • Number of Elements
    4
  • Type
    General Purpose
  • Packaging
    Tube
  • Product Status
    Active
  • Series
    -
The MAX993EUD+ is a precision, low-power operational amplifier (op-amp) integrated circuit chip. It offers several advantages and can be used in various application scenarios. Some of the advantages and application scenarios of the MAX993EUD+ are:Advantages: 1. Low Power Consumption: The MAX993EUD+ has a low quiescent current of 1.5μA, making it suitable for battery-powered applications or any scenario where power efficiency is crucial. 2. Precision Performance: It provides high precision with a maximum offset voltage of 0.5mV and low input bias current of 1pA, ensuring accurate amplification of signals. 3. Wide Supply Voltage Range: The chip operates over a wide supply voltage range of 2.7V to 11V, allowing flexibility in power supply selection. 4. Rail-to-Rail Output: The MAX993EUD+ offers rail-to-rail output swing, enabling it to drive signals close to the supply voltage rails, maximizing dynamic range.Application Scenarios: 1. Sensor Signal Conditioning: The precision and low power consumption of the MAX993EUD+ make it suitable for amplifying and conditioning signals from various sensors, such as temperature sensors, pressure sensors, or light sensors. 2. Portable and Battery-Powered Devices: Due to its low power consumption, the MAX993EUD+ is ideal for use in portable and battery-powered devices like handheld instruments, portable medical devices, or wireless sensor nodes. 3. Signal Amplification: The chip can be used for general-purpose signal amplification in audio applications, instrumentation, or data acquisition systems. 4. Low Voltage Applications: With its wide supply voltage range, the MAX993EUD+ can be employed in low voltage applications, such as battery monitoring, where the supply voltage might be limited. 5. Industrial and Automotive Applications: The precision and robustness of the MAX993EUD+ make it suitable for use in industrial and automotive applications, including control systems, motor drives, or automotive sensor interfaces.It is important to note that the specific application and advantages of the MAX993EUD+ may vary depending on the requirements and design considerations of the particular project.
MAX993EUD+ Relevant information