Home / Comparators / MCP6561T-E/LTVAO/
MCP6561T-E/LTVAO

MCP6561T-E/LTVAO

Manufacturer No:

MCP6561T-E/LTVAO

Manufacturer:

Microchip Technology

Description:

IC COMPARATOR 1 GEN PUR SC70-5

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

MCP6561T-E/LTVAO Specifications

  • Type
    Parameter
  • Supplier Device Package
    SC-70-5
  • Mounting Type
    Surface Mount
  • Package / Case
    5-TSSOP, SC-70-5, SOT-353
  • Operating Temperature
    -40°C ~ 125°C
  • Hysteresis
    5mV
  • Propagation Delay (Max)
    80ns
  • CMRR, PSRR (Typ)
    66dB CMRR, 70dB PSRR
  • Current - Quiescent (Max)
    130µA
  • Current - Output (Typ)
    50mA
  • Current - Input Bias (Max)
    1pA @ 5.5V
  • Voltage - Input Offset (Max)
    10mV @ 5.5V
  • Voltage - Supply, Single/Dual (±)
    1.8V ~ 5.5V
  • Output Type
    CMOS, Push-Pull, Rail-to-Rail, TTL
  • Number of Elements
    1
  • Type
    General Purpose
  • Packaging
    Cut Tape (CT)
  • Packaging
    Tape & Reel (TR)
  • Product Status
    Active
  • Series
    Automotive, AEC-Q100
The MCP6561T-E/LTVAO is a high-speed, low-power operational amplifier (op-amp) integrated circuit chip. It offers several advantages and can be applied in various scenarios. Here are some of the advantages and application scenarios of the MCP6561T-E/LTVAO:Advantages: 1. High Speed: The MCP6561T-E/LTVAO is a high-speed op-amp with a bandwidth of 65 MHz. It can handle fast signal processing requirements, making it suitable for applications that require high-speed amplification.2. Low Power Consumption: This op-amp chip operates at low power, making it energy-efficient. It is ideal for battery-powered devices or applications where power consumption needs to be minimized.3. Rail-to-Rail Input and Output: The MCP6561T-E/LTVAO supports rail-to-rail input and output operation. It can handle signals that swing close to the power supply rails, providing a wider dynamic range and better signal fidelity.4. Low Input Offset Voltage: The MCP6561T-E/LTVAO has a low input offset voltage, which minimizes errors in amplification. This makes it suitable for applications that require accurate signal amplification.5. Small Package Size: The MCP6561T-E/LTVAO is available in small package options, such as SOT-23 and SC-70, which occupy minimal board space. This makes it suitable for compact designs and applications with size constraints.Application Scenarios: 1. Signal Conditioning: The MCP6561T-E/LTVAO can be used for signal conditioning in various applications, such as sensor interfaces, data acquisition systems, and instrumentation. It can amplify weak signals, filter out noise, and provide accurate signal conditioning.2. High-Speed Data Communication: Due to its high bandwidth, the MCP6561T-E/LTVAO is suitable for high-speed data communication applications. It can be used in line drivers, equalizers, or pre-amplifiers for high-speed data transmission over cables or optical fibers.3. Audio Amplification: The low power consumption and rail-to-rail operation of the MCP6561T-E/LTVAO make it suitable for audio amplification applications. It can be used in portable audio devices, headphones, or audio amplifiers where low power consumption and high fidelity are desired.4. Test and Measurement Equipment: The high-speed and accurate amplification capabilities of the MCP6561T-E/LTVAO make it suitable for test and measurement equipment. It can be used in oscilloscopes, spectrum analyzers, or signal generators to amplify and condition signals for accurate measurements.5. Battery-Powered Devices: The low power consumption of the MCP6561T-E/LTVAO makes it ideal for battery-powered devices. It can be used in portable devices, IoT sensors, or wearable devices where power efficiency is crucial.Overall, the MCP6561T-E/LTVAO offers high-speed, low-power, and accurate amplification capabilities, making it suitable for a wide range of applications requiring signal conditioning and amplification.
MCP6561T-E/LTVAO Relevant information