Home / Comparators / MCP6567T-E/MS/
MCP6567T-E/MS

MCP6567T-E/MS

Manufacturer No:

MCP6567T-E/MS

Manufacturer:

Microchip Technology

Description:

IC COMPARATOR 2 GEN PUR 8MSOP

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

MCP6567T-E/MS Specifications

  • Type
    Parameter
  • Supplier Device Package
    8-MSOP
  • Mounting Type
    Surface Mount
  • Package / Case
    8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
  • Operating Temperature
    -40°C ~ 125°C
  • Hysteresis
    5mV
  • Propagation Delay (Max)
    80ns
  • CMRR, PSRR (Typ)
    66dB CMRR, 70dB PSRR
  • Current - Quiescent (Max)
    130µA
  • Current - Output (Typ)
    50mA
  • Current - Input Bias (Max)
    1pA @ 5.5V
  • Voltage - Input Offset (Max)
    10mV @ 5.5V
  • Voltage - Supply, Single/Dual (±)
    1.8V ~ 5.5V
  • Output Type
    CMOS, Open-Drain
  • Number of Elements
    2
  • Type
    General Purpose
  • Packaging
    Cut Tape (CT)
  • Packaging
    Tape & Reel (TR)
  • Product Status
    Active
  • Series
    -
The MCP6567T-E/MS is a high-speed, low-power operational amplifier (op-amp) integrated circuit chip manufactured by Microchip Technology. It offers several advantages and can be used in various application scenarios. Here are some of its key advantages and application scenarios:Advantages: 1. High Speed: The MCP6567T-E/MS is a high-speed op-amp with a bandwidth of 450 MHz. It is suitable for applications that require fast signal processing and amplification.2. Low Power Consumption: This op-amp chip operates at low power, making it suitable for battery-powered devices or applications where power efficiency is crucial.3. Rail-to-Rail Input and Output: The chip supports rail-to-rail input and output operation, allowing it to handle signals that span the entire supply voltage range. This feature is useful in applications where the input or output signals can approach the power supply rails.4. Wide Supply Voltage Range: The MCP6567T-E/MS can operate from a wide supply voltage range of 2.7V to 5.5V, making it compatible with a variety of power sources.5. Small Package Size: The chip is available in a small MSOP-8 package, which is suitable for space-constrained applications or designs where size reduction is important.Application Scenarios: 1. High-Speed Signal Amplification: The MCP6567T-E/MS can be used in applications that require high-speed signal amplification, such as in communication systems, data acquisition, or high-frequency measurement equipment.2. Active Filters: The high bandwidth and low power consumption of this op-amp make it suitable for active filter designs, where it can be used to amplify and process signals in various filter configurations.3. Portable Devices: Due to its low power consumption and small package size, the MCP6567T-E/MS is well-suited for portable devices like smartphones, tablets, portable media players, or any battery-powered electronics that require high-speed signal processing.4. Sensor Interfaces: The rail-to-rail input and output capability of this op-amp chip make it suitable for sensor interface applications. It can amplify and condition signals from various sensors, such as temperature sensors, pressure sensors, or accelerometers.5. Test and Measurement Equipment: The high-speed and low-power characteristics of the MCP6567T-E/MS make it suitable for use in test and measurement equipment, such as oscilloscopes, signal generators, or spectrum analyzers, where accurate and fast signal processing is required.It's important to note that the specific application scenarios may vary depending on the requirements and specifications of the overall system design.
MCP6567T-E/MS Relevant information