Home / Comparators / MCP6546-E/P/
MCP6546-E/P

MCP6546-E/P

Manufacturer No:

MCP6546-E/P

Manufacturer:

Microchip Technology

Description:

IC COMPARATOR 1 GEN PUR 8DIP

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

MCP6546-E/P Specifications

  • Type
    Parameter
  • Supplier Device Package
    8-PDIP
  • Mounting Type
    Through Hole
  • Package / Case
    8-DIP (0.300", 7.62mm)
  • Operating Temperature
    -40°C ~ 125°C
  • Hysteresis
    6.5mV
  • Propagation Delay (Max)
    8µs
  • CMRR, PSRR (Typ)
    70dB CMRR, 80dB PSRR
  • Current - Quiescent (Max)
    1µA
  • Current - Output (Typ)
    30mA
  • Current - Input Bias (Max)
    1pA @ 5.5V
  • Voltage - Input Offset (Max)
    7mV @ 5.5V
  • Voltage - Supply, Single/Dual (±)
    1.6V ~ 5.5V
  • Output Type
    CMOS, Open-Drain, Rail-to-Rail, TTL
  • Number of Elements
    1
  • Type
    General Purpose
  • Packaging
    Tube
  • Product Status
    Active
  • Series
    -
The MCP6546-E/P is a low-power, open-drain output comparator integrated circuit chip manufactured by Microchip Technology. It offers several advantages and can be used in various application scenarios. Here are some of its key advantages and application scenarios:Advantages: 1. Low Power Consumption: The MCP6546-E/P is designed to operate at very low power levels, making it suitable for battery-powered applications or any scenario where power efficiency is crucial.2. Wide Supply Voltage Range: It can operate within a wide supply voltage range of 2.7V to 5.5V, allowing it to be used in a variety of systems with different power supply configurations.3. Rail-to-Rail Input and Output: The chip supports rail-to-rail input and output voltage ranges, enabling it to work with signals that span the entire supply voltage range. This feature ensures accurate and reliable operation in various signal conditions.4. Open-Drain Output: The MCP6546-E/P has an open-drain output configuration, which means it can sink current but cannot source it. This makes it suitable for interfacing with other devices or systems that require open-drain outputs, such as I2C or SMBus communication.5. Low Input Offset Voltage: The chip has a low input offset voltage, which minimizes errors in comparator applications where precise voltage comparisons are required.Application Scenarios: 1. Battery-Powered Devices: The low power consumption and wide supply voltage range of the MCP6546-E/P make it ideal for use in battery-powered devices, such as portable electronics, IoT sensors, or wearable devices.2. Level Shifting: The open-drain output configuration and rail-to-rail capability make the chip suitable for level shifting applications. It can be used to interface between different voltage domains or to convert logic levels between different systems.3. Signal Monitoring and Detection: The MCP6546-E/P can be used as a comparator to monitor and detect voltage levels or changes in various systems. It can be employed in applications such as overvoltage/undervoltage detection, window comparators, or threshold detectors.4. Communication Interfaces: The open-drain output and low power consumption make the chip suitable for interfacing with communication protocols that utilize open-drain signaling, such as I2C or SMBus. It can be used as a level translator or voltage monitor in these scenarios.5. General Purpose Comparators: The MCP6546-E/P can be used as a general-purpose comparator in various applications where accurate voltage comparisons are required. It can be utilized in systems such as power management, motor control, instrumentation, or audio amplifiers.It is important to note that the specific application scenarios may vary depending on the requirements and design considerations of the system in which the MCP6546-E/P is being used.
MCP6546-E/P Relevant information