Home / Instrumentation, OP Amps, Buffer Amps / MCP6002-I/MS/
MCP6002-I/MS

MCP6002-I/MS

Manufacturer No:

MCP6002-I/MS

Manufacturer:

Microchip Technology

Description:

IC OPAMP GP 2 CIRCUIT 8MSOP

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

MCP6002-I/MS Specifications

  • Type
    Parameter
  • -3db Bandwidth
    -
  • Gain Bandwidth Product
    1 MHz
  • Supplier Device Package
    8-MSOP
  • Package / Case
    8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
  • Mounting Type
    Surface Mount
  • Operating Temperature
    -40°C ~ 85°C (TA)
  • Voltage - Supply Span (Max)
    6 V
  • Voltage - Supply Span (Min)
    1.8 V
  • Current - Output / Channel
    23 mA
  • Current - Supply
    100µA (x2 Channels)
  • Voltage - Input Offset
    4.5 mV
  • Current - Input Bias
    1 pA
  • Slew Rate
    0.6V/µs
  • Output Type
    Rail-to-Rail
  • Number of Circuits
    2
  • Amplifier Type
    General Purpose
  • Packaging
    Tube
  • Product Status
    Active
  • Series
    -
The MCP6002-I/MS is a dual operational amplifier integrated circuit chip manufactured by Microchip Technology. It offers several advantages and can be applied in various scenarios. Here are some of its advantages and application scenarios:Advantages: 1. Low Power Consumption: The MCP6002-I/MS has a low quiescent current of 100 μA per amplifier, making it suitable for battery-powered applications and low-power designs. 2. Rail-to-Rail Input and Output: It supports rail-to-rail input and output voltage ranges, allowing it to operate with signals close to the power supply rails. This feature is beneficial in applications where the input or output signals need to span the entire supply voltage range. 3. Wide Supply Voltage Range: It can operate from a single supply voltage as low as 1.8V to as high as 6.0V, providing flexibility in various power supply configurations. 4. High Gain Bandwidth Product: With a gain bandwidth product of 1 MHz, the MCP6002-I/MS can handle moderate-frequency signals and amplification requirements. 5. Low Input Offset Voltage and Low Input Bias Current: These characteristics ensure accurate and precise amplification of small signals.Application Scenarios: 1. Sensor Signal Conditioning: The MCP6002-I/MS can be used to amplify and condition signals from various sensors such as temperature sensors, pressure sensors, and light sensors. Its low power consumption and rail-to-rail capabilities make it suitable for low-level sensor signals. 2. Portable Audio Devices: It can be utilized in portable audio devices like MP3 players, smartphones, and portable speakers for audio amplification and filtering. The low power consumption and wide supply voltage range make it ideal for battery-powered applications. 3. Battery Management Systems: The MCP6002-I/MS can be employed in battery management systems to monitor and control battery voltage levels, charging, and discharging. Its low power consumption and rail-to-rail capabilities enable accurate measurement and control of battery voltages. 4. Signal Conditioning and Filtering: It can be used for general-purpose signal conditioning and filtering applications, such as amplifying weak signals, removing noise, and shaping signal waveforms. 5. Industrial Control Systems: The MCP6002-I/MS can be utilized in industrial control systems for amplifying and processing control signals, sensor signals, and feedback signals. Its low power consumption and wide supply voltage range make it suitable for industrial applications.These are just a few examples of the advantages and application scenarios of the MCP6002-I/MS integrated circuit chip. Its versatility, low power consumption, and rail-to-rail capabilities make it a popular choice in various electronic designs.
MCP6002-I/MS Relevant information