Home / Instrumentation, OP Amps, Buffer Amps / MCP6001T-E/LT/
MCP6001T-E/LT

MCP6001T-E/LT

Manufacturer No:

MCP6001T-E/LT

Manufacturer:

Microchip Technology

Description:

IC OPAMP GP 1 CIRCUIT SC70-5

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

MCP6001T-E/LT Specifications

  • Type
    Parameter
  • -3db Bandwidth
    -
  • Gain Bandwidth Product
    1 MHz
  • Supplier Device Package
    SC-70-5
  • Package / Case
    5-TSSOP, SC-70-5, SOT-353
  • Mounting Type
    Surface Mount
  • Operating Temperature
    -40°C ~ 125°C
  • Voltage - Supply Span (Max)
    6 V
  • Voltage - Supply Span (Min)
    1.8 V
  • Current - Output / Channel
    23 mA
  • Current - Supply
    100µA
  • Voltage - Input Offset
    4.5 mV
  • Current - Input Bias
    1 pA
  • Slew Rate
    0.6V/µs
  • Output Type
    Rail-to-Rail
  • Number of Circuits
    1
  • Amplifier Type
    General Purpose
  • Packaging
    Cut Tape (CT)
  • Packaging
    Tape & Reel (TR)
  • Product Status
    Active
  • Series
    -
The MCP6001T-E/LT is a single-channel, low-power operational amplifier (op-amp) integrated circuit chip. It offers several advantages and can be used in various application scenarios. Here are some of the advantages and application scenarios of the MCP6001T-E/LT:Advantages: 1. Low Power Consumption: The MCP6001T-E/LT has a low quiescent current of 100 μA, making it suitable for battery-powered applications where power efficiency is crucial. 2. Rail-to-Rail Input and Output: It supports rail-to-rail input and output voltage range, allowing it to operate with signals close to the power supply rails. This feature is beneficial in applications where the input or output signals need to swing close to the supply voltage limits. 3. Wide Supply Voltage Range: The chip can operate from a single supply voltage as low as 1.8V up to a maximum of 6V, providing flexibility in various voltage supply scenarios. 4. High Gain Bandwidth Product: With a gain bandwidth product of 1 MHz, the MCP6001T-E/LT can handle moderate frequency signals, making it suitable for audio amplification and basic signal conditioning applications. 5. Low Input Offset Voltage and Low Input Bias Current: These characteristics ensure accurate and precise signal amplification, making the chip suitable for sensor interfaces and measurement applications.Application Scenarios: 1. Sensor Interfaces: The low input offset voltage and low input bias current of the MCP6001T-E/LT make it suitable for amplifying and conditioning signals from various sensors, such as temperature sensors, pressure sensors, and light sensors. 2. Battery-Powered Devices: The low power consumption of the chip makes it ideal for use in portable and battery-powered devices, such as handheld instruments, medical devices, and wearable electronics. 3. Audio Amplification: The MCP6001T-E/LT can be used for basic audio amplification tasks, such as headphone amplifiers, audio signal conditioning, and pre-amplification stages in audio systems. 4. Signal Conditioning: The rail-to-rail input and output capability of the chip, along with its low power consumption, make it suitable for various signal conditioning applications, such as level shifting, filtering, and buffering. 5. General Purpose Amplification: The MCP6001T-E/LT can be used as a general-purpose op-amp in various circuits where low power consumption, rail-to-rail operation, and moderate bandwidth are required.It is important to note that the specific application scenarios may vary depending on the requirements and specifications of the overall system design.
MCP6001T-E/LT Relevant information