Home / Instrumentation, OP Amps, Buffer Amps / INA117KU/2K5/
INA117KU/2K5

INA117KU/2K5

Manufacturer No:

INA117KU/2K5

Manufacturer:

Texas Instruments

Description:

INA117 - HIGH COMMON-MODE VOLTAG

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

INA117KU/2K5 Specifications

  • Type
    Parameter
  • -3db Bandwidth
    200 kHz
  • Supplier Device Package
    8-SOIC
  • Package / Case
    8-SOIC (0.154", 3.90mm Width)
  • Mounting Type
    Surface Mount
  • Operating Temperature
    -40°C ~ 85°C
  • Voltage - Supply Span (Max)
    36 V
  • Voltage - Supply Span (Min)
    10 V
  • Current - Output / Channel
    20 mA
  • Current - Supply
    1.5mA
  • Voltage - Input Offset
    600 µV
  • Slew Rate
    2.6V/µs
  • Output Type
    -
  • Number of Circuits
    1
  • Amplifier Type
    Differential
  • Packaging
    Bulk
  • Product Status
    Active
  • Series
    -
The INA117KU/2K5 is a precision, low-power, low-cost instrumentation amplifier integrated circuit chip. It offers several advantages and can be applied in various scenarios. Here are some of the advantages and application scenarios of the INA117KU/2K5:Advantages: 1. High precision: The INA117KU/2K5 provides high accuracy and precision in amplifying small differential signals, making it suitable for applications that require precise measurements. 2. Low power consumption: It operates at low power, making it suitable for battery-powered or low-power applications. 3. Low cost: The INA117KU/2K5 is a cost-effective solution compared to other instrumentation amplifiers, making it suitable for cost-sensitive applications. 4. Wide input voltage range: It can handle a wide range of input voltages, allowing it to be used in various applications. 5. High common-mode rejection ratio (CMRR): The INA117KU/2K5 has a high CMRR, which means it can reject common-mode noise and interference effectively.Application scenarios: 1. Sensor amplification: The INA117KU/2K5 can be used to amplify small signals from sensors such as temperature sensors, pressure sensors, strain gauges, etc. This makes it suitable for applications like industrial process control, medical instrumentation, and environmental monitoring. 2. Bridge amplification: It can be used to amplify signals from bridge circuits, such as strain gauge bridges or load cell bridges, for accurate measurement of physical quantities like force, weight, or pressure. 3. Data acquisition systems: The INA117KU/2K5 can be used in data acquisition systems to amplify and condition analog signals before digitization. This is useful in applications like data logging, test and measurement equipment, and industrial automation. 4. Medical instrumentation: Due to its precision and low power consumption, the INA117KU/2K5 can be used in medical devices for amplifying bio-potential signals like ECG (electrocardiogram) or EEG (electroencephalogram). 5. Audio amplification: It can be used in audio applications where low-power, high-precision amplification is required, such as in audio mixers, preamplifiers, or audio recording equipment.These are just a few examples of the advantages and application scenarios of the INA117KU/2K5 integrated circuit chip. Its versatility and performance make it suitable for a wide range of applications where precision amplification of small signals is required.
INA117KU/2K5 Relevant information