Home / Instrumentation, OP Amps, Buffer Amps / LM2904VQDRG4Q1/
LM2904VQDRG4Q1

LM2904VQDRG4Q1

Manufacturer No:

LM2904VQDRG4Q1

Manufacturer:

Texas Instruments

Description:

LM2904-Q1 AUTOMOTIVE CATALOG DUA

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

LM2904VQDRG4Q1 Specifications

  • Type
    Parameter
  • -3db Bandwidth
    -
  • Supplier Device Package
    8-SOIC
  • Package / Case
    8-SOIC (0.154", 3.90mm Width)
  • Mounting Type
    Surface Mount
  • Operating Temperature
    -40°C ~ 125°C (TA)
  • Voltage - Supply Span (Max)
    26 V
  • Voltage - Supply Span (Min)
    3 V
  • Current - Output / Channel
    30 mA
  • Current - Supply
    500µA (x2 Channels)
  • Voltage - Input Offset
    3 mV
  • Current - Input Bias
    20 nA
  • Slew Rate
    0.3V/µs
  • Output Type
    -
  • Number of Circuits
    2
  • Amplifier Type
    General Purpose
  • Packaging
    Bulk
  • Product Status
    Active
  • Series
    Automotive, AEC-Q100
The LM2904VQDRG4Q1 is a dual operational amplifier integrated circuit chip. It offers several advantages and can be applied in various scenarios. Some of the advantages and application scenarios of the LM2904VQDRG4Q1 are:Advantages: 1. Low power consumption: The LM2904VQDRG4Q1 operates at low power, making it suitable for battery-powered applications or devices where power efficiency is crucial. 2. Wide supply voltage range: It can operate with a wide range of supply voltages, typically from 3V to 32V, making it versatile and compatible with different power sources. 3. Rail-to-rail input and output: The chip supports rail-to-rail input and output voltage ranges, allowing it to handle signals close to the power supply rails, maximizing the dynamic range and signal fidelity. 4. High gain bandwidth product: The LM2904VQDRG4Q1 has a high gain bandwidth product, typically around 1 MHz, enabling it to amplify signals accurately across a wide range of frequencies. 5. Low input offset voltage and current: It exhibits low input offset voltage and current, ensuring accurate and precise amplification of small signals.Application Scenarios: 1. Signal conditioning: The LM2904VQDRG4Q1 can be used for amplifying, filtering, and conditioning signals in various applications such as sensor interfaces, data acquisition systems, and instrumentation. 2. Audio amplification: It can be employed in audio amplifiers, preamplifiers, and headphone amplifiers, providing low distortion and high-quality audio amplification. 3. Active filters: The chip can be used to implement active filters like low-pass, high-pass, band-pass, and notch filters, allowing precise control over the frequency response. 4. Voltage and current measurement: The LM2904VQDRG4Q1 can be utilized in voltage and current measurement circuits, providing accurate amplification and conditioning of the measured signals. 5. Comparator circuits: It can be used in comparator circuits to compare two input voltages and generate digital outputs based on the comparison results, suitable for applications like level detection, threshold detection, and window comparators.These are just a few examples of the advantages and application scenarios of the LM2904VQDRG4Q1 integrated circuit chip. Its versatility, low power consumption, and high performance make it suitable for a wide range of electronic applications.
LM2904VQDRG4Q1 Relevant information