Home / Instrumentation, OP Amps, Buffer Amps / TLC2272AQDRG4/
TLC2272AQDRG4

TLC2272AQDRG4

Manufacturer No:

TLC2272AQDRG4

Manufacturer:

Texas Instruments

Description:

TLC2272A - RAIL-TO-RAIL DUAL OPE

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

TLC2272AQDRG4 Specifications

  • Type
    Parameter
  • -3db Bandwidth
    -
  • Supplier Device Package
    8-SOIC
  • Package / Case
    8-SOIC (0.154", 3.90mm Width)
  • Mounting Type
    Surface Mount
  • Operating Temperature
    -40°C ~ 125°C (TA)
  • Voltage - Supply Span (Max)
    16 V
  • Voltage - Supply Span (Min)
    4.4 V
  • Current - Output / Channel
    50 mA
  • Current - Supply
    2.4mA (x2 Channels)
  • Voltage - Input Offset
    300 µV
  • Current - Input Bias
    1 pA
  • Gain Bandwidth Product
    2.25 MHz
  • Slew Rate
    3.6V/µs
  • Output Type
    Rail-to-Rail
  • Number of Circuits
    2
  • Amplifier Type
    CMOS
  • Packaging
    Bulk
  • Product Status
    Active
  • Series
    Automotive, AEC-Q100
The TLC2272AQDRG4 is a dual operational amplifier integrated circuit chip manufactured by Texas Instruments. It offers several advantages and can be applied in various scenarios. Some of the advantages and application scenarios of the TLC2272AQDRG4 are:Advantages: 1. Low power consumption: The TLC2272AQDRG4 operates at a low supply current of 550μA per channel, making it suitable for battery-powered applications and low-power designs. 2. Rail-to-rail input and output: It supports rail-to-rail input and output voltage ranges, allowing it to operate with signals close to the power supply rails. This feature is beneficial in applications where the input and output signals need to cover a wide range. 3. Wide supply voltage range: The chip can operate with a supply voltage range of 2.7V to 16V, making it compatible with a variety of power supply configurations. 4. High precision and accuracy: The TLC2272AQDRG4 offers low offset voltage, low offset drift, and high common-mode rejection ratio (CMRR), ensuring accurate and precise amplification of signals. 5. ESD protection: It provides built-in electrostatic discharge (ESD) protection, safeguarding the chip from damage due to static electricity.Application Scenarios: 1. Portable devices: The low power consumption and wide supply voltage range make the TLC2272AQDRG4 suitable for use in portable devices such as smartphones, tablets, and portable audio players. 2. Sensor amplification: The high precision and accuracy of the chip make it ideal for amplifying signals from various sensors, such as temperature sensors, pressure sensors, and light sensors. 3. Signal conditioning: The rail-to-rail input and output capability of the TLC2272AQDRG4 make it suitable for signal conditioning applications, where the input and output signals need to be accurately amplified and adjusted. 4. Audio amplification: The chip can be used in audio amplification circuits, such as headphone amplifiers, audio preamplifiers, and audio mixers, due to its low distortion and wide dynamic range. 5. Industrial and automotive applications: The wide supply voltage range and ESD protection make the TLC2272AQDRG4 suitable for use in industrial and automotive applications, where robustness and reliability are crucial.It is important to note that the specific application and advantages of the TLC2272AQDRG4 may vary depending on the circuit design and requirements.
TLC2272AQDRG4 Relevant information