Home / Instrumentation, OP Amps, Buffer Amps / LM224KNE4/
LM224KNE4

LM224KNE4

Manufacturer No:

LM224KNE4

Manufacturer:

Texas Instruments

Description:

IC OPAMP GP 4 CIRCUIT 14DIP

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

LM224KNE4 Specifications

  • Type
    Parameter
  • -3db Bandwidth
    -
  • Voltage - Supply Span (Max)
    30 V
  • Voltage - Supply Span (Min)
    3 V
  • Current - Output / Channel
    30 mA
  • Supplier Device Package
    14-PDIP
  • Package / Case
    14-DIP (0.300", 7.62mm)
  • Mounting Type
    Through Hole
  • Operating Temperature
    -25°C ~ 85°C (TA)
  • Current - Supply
    1.4mA (x4 Channels)
  • Voltage - Input Offset
    3 mV
  • Current - Input Bias
    20 nA
  • Gain Bandwidth Product
    1.2 MHz
  • Slew Rate
    0.5V/µs
  • Output Type
    -
  • Number of Circuits
    4
  • Amplifier Type
    General Purpose
  • Packaging
    Bulk
  • Product Status
    Active
  • Series
    Automotive, AEC-Q100
The LM224KNE4 is a quad operational amplifier integrated circuit chip. It offers several advantages and can be applied in various scenarios. Some of the advantages and application scenarios of the LM224KNE4 are:Advantages: 1. Quad Op-Amp: The LM224KNE4 consists of four independent operational amplifiers in a single package. This allows for cost-effective and space-saving solutions, as multiple amplifiers can be integrated into a single chip.2. Low Power Consumption: The LM224KNE4 is designed to operate with low power consumption, making it suitable for battery-powered applications or situations where power efficiency is crucial.3. Wide Supply Voltage Range: It can operate with a wide supply voltage range, typically from 3V to 32V. This flexibility enables its usage in various voltage environments.4. High Input Impedance: The LM224KNE4 has a high input impedance, which means it draws minimal current from the input signal source. This feature makes it suitable for applications where the input signal source has limited current capability.5. Rail-to-Rail Output: The output voltage of the LM224KNE4 can swing close to the supply voltage rails, both on the high and low ends. This allows for maximum utilization of the available voltage range, making it suitable for applications requiring a wide dynamic range.Application Scenarios: 1. Signal Conditioning: The LM224KNE4 can be used for signal conditioning in various applications, such as amplifying weak signals, filtering unwanted noise, or adjusting signal levels.2. Sensor Interface: It can be employed as a sensor interface circuit, where it amplifies and processes signals from sensors like temperature sensors, pressure sensors, or light sensors.3. Audio Amplification: The LM224KNE4 can be used in audio amplification circuits, such as headphone amplifiers or audio preamplifiers, where it amplifies audio signals with low distortion and noise.4. Active Filters: It can be utilized in active filter circuits, such as low-pass, high-pass, or band-pass filters, where it provides amplification and filtering functions simultaneously.5. Voltage References: The LM224KNE4 can be used as a voltage reference circuit, providing stable and accurate reference voltages for other components or circuits in a system.6. Oscillators: It can be employed in oscillator circuits, generating stable and precise oscillating signals for applications like clock generation or timing circuits.These are just a few examples of the advantages and application scenarios of the LM224KNE4 integrated circuit chip. Its versatility and features make it suitable for a wide range of electronic applications.
LM224KNE4 Relevant information