Home / Instrumentation, OP Amps, Buffer Amps / TL062BCPE4/
TL062BCPE4

TL062BCPE4

Manufacturer No:

TL062BCPE4

Manufacturer:

Texas Instruments

Description:

IC OPAMP JFET 2 CIRCUIT 8DIP

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

TL062BCPE4 Specifications

  • Type
    Parameter
  • -3db Bandwidth
    -
  • Voltage - Supply Span (Max)
    30 V
  • Voltage - Supply Span (Min)
    10 V
  • Current - Output / Channel
    20 mA
  • Supplier Device Package
    8-PDIP
  • Package / Case
    8-DIP (0.300", 7.62mm)
  • Mounting Type
    Through Hole
  • Operating Temperature
    0°C ~ 70°C
  • Current - Supply
    200µA (x2 Channels)
  • Voltage - Input Offset
    2 mV
  • Current - Input Bias
    30 pA
  • Gain Bandwidth Product
    1 MHz
  • Slew Rate
    3.5V/µs
  • Output Type
    -
  • Number of Circuits
    2
  • Amplifier Type
    J-FET
  • Packaging
    Bulk
  • Product Status
    Active
  • Series
    -
The TL062BCPE4 is a dual operational amplifier integrated circuit chip. It offers several advantages and can be used in various application scenarios. Some of the advantages and application scenarios of the TL062BCPE4 are:Advantages: 1. Low power consumption: The TL062BCPE4 operates at low power, making it suitable for battery-powered devices and applications where power efficiency is crucial. 2. Wide supply voltage range: It can operate with a wide range of supply voltages, typically from 7V to 36V, allowing flexibility in different power supply configurations. 3. Low input bias and offset currents: The TL062BCPE4 has low input bias and offset currents, resulting in accurate and precise signal amplification and processing. 4. High input impedance: It has a high input impedance, making it suitable for interfacing with various sensors and low-power signal sources. 5. Rail-to-rail output swing: The output voltage can swing close to the supply voltage rails, enabling maximum utilization of the available dynamic range.Application scenarios: 1. Audio amplification: The TL062BCPE4 can be used in audio amplifiers, preamplifiers, and equalizers due to its low noise, low distortion, and wide bandwidth characteristics. 2. Signal conditioning: It can be used for amplifying and conditioning low-level signals from sensors, such as temperature sensors, pressure sensors, and strain gauges. 3. Active filters: The TL062BCPE4 can be used in active filter circuits, such as low-pass, high-pass, band-pass, and notch filters, for signal processing and frequency selection. 4. Instrumentation amplifiers: It can be used in instrumentation amplifiers for precise amplification of small differential signals, commonly used in measurement and data acquisition systems. 5. Voltage-controlled oscillators: The TL062BCPE4 can be used in voltage-controlled oscillator circuits, generating oscillations with frequency controlled by an external voltage signal.These are just a few examples of the advantages and application scenarios of the TL062BCPE4 integrated circuit chip. Its versatility, low power consumption, and accurate signal processing capabilities make it suitable for a wide range of electronic applications.
TL062BCPE4 Relevant information