Home / Instrumentation, OP Amps, Buffer Amps / LMC6042AIN/
LMC6042AIN

LMC6042AIN

Manufacturer No:

LMC6042AIN

Manufacturer:

Texas Instruments

Description:

IC CMOS 2 CIRCUIT 8DIP

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

LMC6042AIN Specifications

  • Type
    Parameter
  • -3db Bandwidth
    -
  • Current - Output / Channel
    40 mA
  • Supplier Device Package
    8-PDIP
  • Package / Case
    8-DIP (0.300", 7.62mm)
  • Mounting Type
    Through Hole
  • Operating Temperature
    -40°C ~ 85°C (TJ)
  • Voltage - Supply Span (Max)
    15.5 V
  • Voltage - Supply Span (Min)
    4.5 V
  • Current - Supply
    26µA (x2 Channels)
  • Voltage - Input Offset
    1 mV
  • Current - Input Bias
    0.002 pA
  • Gain Bandwidth Product
    100 kHz
  • Slew Rate
    0.02V/µs
  • Output Type
    Push-Pull, Rail-to-Rail
  • Number of Circuits
    2
  • Amplifier Type
    CMOS
  • Packaging
    Tube
  • Product Status
    Obsolete
  • Series
    -
The LMC6042AIN is a dual operational amplifier integrated circuit chip manufactured by Texas Instruments. It offers several advantages and can be applied in various scenarios. Some of the advantages and application scenarios of the LMC6042AIN are:Advantages: 1. Low Input Offset Voltage: The LMC6042AIN has a very low input offset voltage, which ensures accurate and precise amplification of signals. 2. Low Input Bias Current: It exhibits low input bias current, minimizing the impact of input current on the circuit's performance. 3. Wide Supply Voltage Range: The chip operates over a wide supply voltage range, typically from ±2.5V to ±15V, making it suitable for various power supply configurations. 4. Rail-to-Rail Output Swing: The LMC6042AIN provides a rail-to-rail output swing, allowing it to handle signals close to the supply voltage rails without distortion. 5. Low Quiescent Current: It has a low quiescent current, making it suitable for low-power applications and extending battery life.Application Scenarios: 1. Signal Conditioning: The LMC6042AIN can be used for amplifying and conditioning signals in various applications, such as sensor interfaces, data acquisition systems, and instrumentation. 2. Active Filters: It can be employed in active filter circuits, such as low-pass, high-pass, band-pass, and notch filters, to shape and manipulate the frequency response of signals. 3. Audio Amplification: The chip can be utilized in audio amplifiers, preamplifiers, and headphone amplifiers, providing high-quality audio amplification with low distortion. 4. Voltage and Current Sensing: It can be used in voltage and current sensing circuits, enabling accurate measurement and monitoring of electrical parameters. 5. Portable and Battery-Powered Devices: Due to its low quiescent current and wide supply voltage range, the LMC6042AIN is suitable for portable and battery-powered devices, including handheld instruments, medical devices, and consumer electronics.It is important to note that the specific application and advantages of the LMC6042AIN may vary depending on the circuit design and requirements.
LMC6042AIN Relevant information