Home / Instrumentation, OP Amps, Buffer Amps / LMV821IDCKTG4/
LMV821IDCKTG4

LMV821IDCKTG4

Manufacturer No:

LMV821IDCKTG4

Manufacturer:

Texas Instruments

Description:

IC OPAMP GP 1 CIRCUIT SC70-5

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

LMV821IDCKTG4 Specifications

  • Type
    Parameter
  • Gain Bandwidth Product
    5.5 MHz
  • Supplier Device Package
    SC-70-5
  • Package / Case
    5-TSSOP, SC-70-5, SOT-353
  • Mounting Type
    Surface Mount
  • Operating Temperature
    -40°C ~ 125°C
  • Voltage - Supply Span (Max)
    5.5 V
  • Voltage - Supply Span (Min)
    2.5 V
  • Current - Supply
    300µA
  • Voltage - Input Offset
    1 mV
  • Current - Input Bias
    40 nA
  • -3db Bandwidth
    -
  • Slew Rate
    1.9V/µs
  • Output Type
    Rail-to-Rail
  • Number of Circuits
    1
  • Amplifier Type
    General Purpose
  • Packaging
    Tape & Reel (TR)
  • Product Status
    Obsolete
  • Series
    -
The LMV821IDCKTG4 is a low-power, low-voltage operational amplifier (op-amp) integrated circuit chip. Some of its advantages and application scenarios are as follows:Advantages: 1. Low Power Consumption: The LMV821IDCKTG4 is designed to operate at low power levels, making it suitable for battery-powered applications or any application where power efficiency is crucial. 2. Low Voltage Operation: It can operate at low supply voltages, typically ranging from 1.8V to 5.5V, making it compatible with a wide range of low-voltage systems. 3. Rail-to-Rail Input and Output: The op-amp supports rail-to-rail input and output voltage ranges, allowing it to handle signals that span the entire supply voltage range, maximizing the dynamic range and signal fidelity. 4. Low Input Bias Current: The LMV821IDCKTG4 has a low input bias current, which minimizes the impact of input current on the accuracy and stability of the circuit. 5. Small Package Size: It comes in a small SOT-23 package, which is ideal for space-constrained applications or designs where miniaturization is a priority.Application Scenarios: 1. Portable Devices: The low power consumption and low voltage operation of the LMV821IDCKTG4 make it suitable for use in portable devices such as smartphones, tablets, portable media players, and wearable devices. 2. Sensor Interfaces: The op-amp can be used in sensor interface circuits, where it amplifies and conditions the weak signals from various sensors such as temperature sensors, pressure sensors, light sensors, etc. 3. Battery Management Systems: The low power consumption and rail-to-rail input/output capabilities make it suitable for use in battery management systems, where it can amplify and process signals from battery voltage and current sensors. 4. Audio Amplification: The LMV821IDCKTG4 can be used in audio amplification circuits, such as headphone amplifiers or small audio systems, where it provides low-distortion amplification of audio signals. 5. Industrial and Automotive Applications: The op-amp can be used in various industrial and automotive applications, such as motor control, instrumentation, data acquisition, and control systems, where low power consumption and small size are desirable.It's important to note that the specific application scenarios may vary depending on the requirements and specifications of the overall system design.
LMV821IDCKTG4 Relevant information