Home / Instrumentation, OP Amps, Buffer Amps / MCP6141T-E/OTVAO/
MCP6141T-E/OTVAO

MCP6141T-E/OTVAO

Manufacturer No:

MCP6141T-E/OTVAO

Manufacturer:

Microchip Technology

Description:

IC OPAMP GP 1 CIRCUIT SOT23-5

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

MCP6141T-E/OTVAO Specifications

  • Type
    Parameter
  • Supplier Device Package
    SOT-23-5
  • Package / Case
    SC-74A, SOT-753
  • Mounting Type
    Surface Mount
  • Operating Temperature
    -40°C ~ 125°C
  • Voltage - Supply Span (Max)
    6 V
  • Voltage - Supply Span (Min)
    1.4 V
  • Current - Output / Channel
    20 mA
  • Current - Supply
    600nA
  • Voltage - Input Offset
    3 mV
  • Current - Input Bias
    1 pA
  • -3db Bandwidth
    -
  • Gain Bandwidth Product
    100 kHz
  • Slew Rate
    0.003V/µs
  • Output Type
    Rail-to-Rail
  • Number of Circuits
    1
  • Amplifier Type
    General Purpose
  • Packaging
    Tape & Reel (TR)
  • Product Status
    Active
  • Series
    Automotive, AEC-Q100
The MCP6141T-E/OTVAO is a low-power, rail-to-rail input and output operational amplifier (op-amp) integrated circuit chip. It offers several advantages and can be used in various application scenarios. Some of the advantages and application scenarios of the MCP6141T-E/OTVAO are:Advantages: 1. Low Power Consumption: The MCP6141T-E/OTVAO is designed to operate at low power, making it suitable for battery-powered applications or any application where power efficiency is crucial. 2. Rail-to-Rail Input and Output: The op-amp supports rail-to-rail input and output voltage range, allowing it to handle signals close to the power supply rails. This feature is beneficial in applications where the input or output signals need to swing close to the supply voltage. 3. Wide Supply Voltage Range: The chip can operate with a wide supply voltage range, typically from 1.8V to 5.5V. This flexibility makes it compatible with various power supply configurations. 4. Low Input Offset Voltage and Low Input Bias Current: The MCP6141T-E/OTVAO has low input offset voltage and input bias current, ensuring accurate and precise signal amplification. 5. Small Package Size: The chip is available in a small package size, such as SOT-23-5, making it suitable for space-constrained applications.Application Scenarios: 1. Sensor Signal Conditioning: The MCP6141T-E/OTVAO can be used to amplify and condition signals from various sensors, such as temperature sensors, pressure sensors, or light sensors. Its low power consumption and rail-to-rail capabilities make it suitable for sensor applications. 2. Portable Devices: Due to its low power consumption and small package size, the chip is ideal for portable devices like smartphones, tablets, or wearable devices. It can be used for audio amplification, signal conditioning, or any other low-power analog signal processing. 3. Battery Management Systems: The MCP6141T-E/OTVAO can be utilized in battery management systems to monitor and control battery voltage levels. Its rail-to-rail capabilities and low power consumption make it suitable for accurate voltage measurements and efficient power management. 4. Industrial Control Systems: The chip can be employed in industrial control systems for signal amplification, filtering, or conditioning. Its wide supply voltage range and small package size make it compatible with various industrial applications. 5. Automotive Electronics: The MCP6141T-E/OTVAO can find applications in automotive electronics, such as engine control units, sensor interfaces, or power management systems. Its low power consumption and rail-to-rail capabilities make it suitable for automotive environments.It is important to note that the specific application scenarios may vary depending on the requirements and specifications of the system being designed.
MCP6141T-E/OTVAO Relevant information