Home / Instrumentation, OP Amps, Buffer Amps / LT1920CN8#PBF/
LT1920CN8#PBF

LT1920CN8#PBF

Manufacturer No:

LT1920CN8#PBF

Manufacturer:

Analog Devices Inc.

Description:

IC INST AMP 1 CIRCUIT 8DIP

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

LT1920CN8#PBF Specifications

  • Type
    Parameter
  • Gain Bandwidth Product
    1 MHz
  • Supplier Device Package
    8-PDIP
  • Package / Case
    8-DIP (0.300", 7.62mm)
  • Mounting Type
    Through Hole
  • Operating Temperature
    0°C ~ 70°C
  • Voltage - Supply Span (Max)
    36 V
  • Voltage - Supply Span (Min)
    4.6 V
  • Current - Supply
    900µA
  • Voltage - Input Offset
    30 µV
  • Current - Input Bias
    500 pA
  • -3db Bandwidth
    -
  • Slew Rate
    1.2V/µs
  • Output Type
    -
  • Number of Circuits
    1
  • Amplifier Type
    Instrumentation
  • Packaging
    Tube
  • Product Status
    Active
  • Series
    -
The LT1920CN8#PBF is a high voltage, high-side current sense amplifier integrated circuit chip manufactured by Analog Devices. It offers several advantages and can be used in various application scenarios. Some of the advantages and application scenarios of the LT1920CN8#PBF are:Advantages: 1. High Voltage Operation: The LT1920CN8#PBF can operate at high voltages up to 60V, making it suitable for applications that require monitoring of high voltage power supplies or battery systems.2. High-Side Current Sensing: It is designed for high-side current sensing applications, where the current flowing through a load is measured by sensing the voltage drop across a sense resistor placed in series with the load.3. High Accuracy: The LT1920CN8#PBF provides high accuracy current sensing with a typical gain error of only 0.5% and a maximum offset voltage of 100μV.4. Wide Dynamic Range: It offers a wide dynamic range of input current measurement, allowing it to accurately measure both small and large currents.5. Low Quiescent Current: The chip has a low quiescent current of 60μA, which helps in reducing power consumption and increasing battery life in portable applications.Application Scenarios: 1. Power Management: The LT1920CN8#PBF can be used in power management applications to monitor and control the current flowing through power supplies, batteries, or other high voltage systems.2. Motor Control: It can be employed in motor control applications to measure the current flowing through the motor windings, enabling precise control and protection against overcurrent conditions.3. Battery Monitoring: The chip can be utilized in battery monitoring systems to measure the charging and discharging currents of batteries, ensuring optimal performance and preventing overcharging or over-discharging.4. Automotive Electronics: The LT1920CN8#PBF is suitable for automotive applications, such as electric vehicle powertrain monitoring, battery management systems, and current sensing in various automotive subsystems.5. Industrial Automation: It can be used in industrial automation systems for current monitoring in motor drives, robotics, power supplies, and other high voltage equipment.Overall, the LT1920CN8#PBF integrated circuit chip offers high voltage operation, accurate current sensing, and low power consumption, making it suitable for a wide range of applications requiring high-side current sensing in high voltage environments.
LT1920CN8#PBF Relevant information