Home / Instrumentation, OP Amps, Buffer Amps / INA186A2IDCKT/
INA186A2IDCKT

INA186A2IDCKT

Manufacturer No:

INA186A2IDCKT

Manufacturer:

Texas Instruments

Description:

IC CURR SENSE 1 CIRCUIT SC70-6

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

INA186A2IDCKT Specifications

  • Type
    Parameter
  • -3db Bandwidth
    -
  • Supplier Device Package
    SC-70-6
  • Package / Case
    6-TSSOP, SC-88, SOT-363
  • Mounting Type
    Surface Mount
  • Operating Temperature
    -40°C ~ 125°C (TA)
  • Voltage - Supply Span (Max)
    5.5 V
  • Voltage - Supply Span (Min)
    1.7 V
  • Current - Supply
    48µA
  • Voltage - Input Offset
    3 µV
  • Current - Input Bias
    500 pA
  • Gain Bandwidth Product
    37 kHz
  • Slew Rate
    0.3V/µs
  • Output Type
    Rail-to-Rail
  • Number of Circuits
    1
  • Amplifier Type
    Current Sense
  • Packaging
    Cut Tape (CT)
  • Packaging
    Tape & Reel (TR)
  • Product Status
    Active
  • Series
    Zero-Drift
The INA186A2IDCKT is a high-side measurement, bi-directional, zero-drift, current shunt monitor integrated circuit. Here are some advantages and application scenarios of the INA186A2IDCKT:1. High Accuracy: The INA186A2IDCKT provides high accuracy current measurements with maximum offset voltage of 100μV and a maximum gain error of 0.8%.2. Bi-Directional Measurement: It supports current measurement in both directions, allowing monitoring of current flowing into and out of a load.3. Zero-Drift Technology: The INA186A2IDCKT utilizes zero-drift technology, which minimizes voltage offset and drift over time, temperature, and stress. This ensures more accurate and stable current measurements.4. Wide Common-Mode Range: It offers a wide common-mode range from 2.7V to 42V, making it compatible with a variety of input voltage levels.5. Low Quiescent Current: With a typical quiescent current of 1.2mA, the INA186A2IDCKT consumes low power, making it suitable for battery-powered applications.6. Current Sensing Applications: The chip is commonly used in various current sensing applications such as power supplies, motor control, battery management systems, solar panels, and automotive systems.7. Overcurrent and Fault Detection: The INA186A2IDCKT can be used to monitor and detect overcurrent conditions in systems, triggering protective actions or fault diagnosis.8. Current Monitoring for Diagnostic Purposes: It allows accurate measurement and monitoring of current for diagnostic purposes like detecting faults or abnormal behavior in circuits or systems.9. Feedback Control: The chip can be utilized in closed-loop feedback control systems to regulate and control current flow based on the measured values.Overall, the INA186A2IDCKT offers high-accuracy current measurement, bi-directional sensing, and zero-drift technology, making it suitable for a range of applications where precise current monitoring is required.
INA186A2IDCKT Relevant information