Home / Instrumentation, OP Amps, Buffer Amps / MCP602-E/P/
MCP602-E/P

MCP602-E/P

Manufacturer No:

MCP602-E/P

Manufacturer:

Microchip Technology

Description:

IC CMOS 2 CIRCUIT 8DIP

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

MCP602-E/P Specifications

  • Type
    Parameter
  • -3db Bandwidth
    -
  • Supplier Device Package
    8-PDIP
  • Package / Case
    8-DIP (0.300", 7.62mm)
  • Mounting Type
    Through Hole
  • Operating Temperature
    -40°C ~ 125°C (TA)
  • Voltage - Supply Span (Max)
    6 V
  • Voltage - Supply Span (Min)
    2.7 V
  • Current - Output / Channel
    22 mA
  • Current - Supply
    230µA (x2 Channels)
  • Voltage - Input Offset
    700 µV
  • Current - Input Bias
    1 pA
  • Gain Bandwidth Product
    2.8 MHz
  • Slew Rate
    2.3V/µs
  • Output Type
    Rail-to-Rail
  • Number of Circuits
    2
  • Amplifier Type
    CMOS
  • Packaging
    Tube
  • Product Status
    Active
  • Series
    -
The MCP602-E/P is a dual operational amplifier (op-amp) integrated circuit chip manufactured by Microchip Technology. It offers several advantages and can be used in various application scenarios. Here are some of its advantages and common application scenarios:Advantages: 1. Low Power Consumption: The MCP602-E/P has a low quiescent current of 230 μA per amplifier, making it suitable for battery-powered applications or any scenario where power efficiency is crucial. 2. Wide Supply Voltage Range: It operates from a single supply voltage as low as 2.7V to as high as 6V, providing flexibility in different power supply configurations. 3. Rail-to-Rail Input and Output: The chip supports rail-to-rail input and output voltage ranges, allowing it to handle signals close to the power supply rails, maximizing the dynamic range and minimizing distortion. 4. High Gain Bandwidth Product: With a gain bandwidth product of 2.8 MHz, the MCP602-E/P can handle high-frequency signals accurately, making it suitable for audio applications and other scenarios requiring wide bandwidth. 5. Low Input Offset Voltage and Low Input Bias Current: These characteristics ensure accurate and precise signal amplification, making the chip suitable for applications that require high precision.Application Scenarios: 1. Signal Conditioning: The MCP602-E/P can be used for amplifying weak signals from sensors or transducers, providing signal conditioning for accurate measurement or further processing. 2. Audio Amplification: Due to its low noise, wide bandwidth, and rail-to-rail capabilities, the chip can be used in audio amplification circuits, such as headphone amplifiers, audio mixers, or portable audio devices. 3. Active Filters: The MCP602-E/P can be used to implement active filters, such as low-pass, high-pass, or band-pass filters, for signal processing applications. 4. Voltage and Current Sensing: The chip can be used in voltage or current sensing circuits, providing accurate measurements for various applications, including power management, battery monitoring, or motor control. 5. Instrumentation Amplifiers: The MCP602-E/P can be used to build instrumentation amplifiers, which are commonly used in precision measurement applications, such as medical equipment, industrial control systems, or data acquisition systems.These are just a few examples of the advantages and application scenarios of the MCP602-E/P integrated circuit chip. Its versatility, low power consumption, and precision make it suitable for a wide range of analog signal processing applications.
MCP602-E/P Relevant information