Home / Instrumentation, OP Amps, Buffer Amps / MCP6232T-E/SN/
MCP6232T-E/SN

MCP6232T-E/SN

Manufacturer No:

MCP6232T-E/SN

Manufacturer:

Microchip Technology

Description:

IC OPAMP GP 2 CIRCUIT 8SOIC

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

MCP6232T-E/SN Specifications

  • Type
    Parameter
  • -3db Bandwidth
    -
  • Supplier Device Package
    8-SOIC
  • Package / Case
    8-SOIC (0.154", 3.90mm Width)
  • Mounting Type
    Surface Mount
  • Operating Temperature
    -40°C ~ 125°C
  • Voltage - Supply Span (Max)
    6 V
  • Voltage - Supply Span (Min)
    1.8 V
  • Current - Output / Channel
    23 mA
  • Current - Supply
    20µA (x2 Channels)
  • Voltage - Input Offset
    5 mV
  • Current - Input Bias
    1 pA
  • Gain Bandwidth Product
    300 kHz
  • Slew Rate
    0.15V/µs
  • Output Type
    Rail-to-Rail
  • Number of Circuits
    2
  • Amplifier Type
    General Purpose
  • Packaging
    Cut Tape (CT)
  • Packaging
    Tape & Reel (TR)
  • Product Status
    Active
  • Series
    -
The MCP6232T-E/SN is a dual operational amplifier integrated circuit chip manufactured by Microchip Technology. It offers several advantages and can be applied in various scenarios. Here are some of its advantages and application scenarios:Advantages: 1. Low Power Consumption: The MCP6232T-E/SN operates at very low power, making it suitable for battery-powered applications or devices where power efficiency is crucial. 2. Rail-to-Rail Input and Output: It supports rail-to-rail input and output voltage range, allowing it to handle signals close to the power supply rails. This feature is beneficial in applications where the input or output signals need to span the entire voltage range. 3. Wide Bandwidth: The chip has a wide bandwidth, enabling it to handle high-frequency signals accurately. This makes it suitable for applications that require amplification or processing of high-frequency signals. 4. Low Input Offset Voltage and Low Input Bias Current: The MCP6232T-E/SN has low input offset voltage and input bias current, ensuring accurate amplification and minimal signal distortion. 5. Small Package Size: The chip comes in a small package size, making it suitable for space-constrained applications or designs where miniaturization is essential.Application Scenarios: 1. Sensor Amplification: The MCP6232T-E/SN can be used to amplify signals from various sensors such as temperature sensors, pressure sensors, or light sensors. Its low power consumption and accurate amplification make it suitable for sensor applications. 2. Portable Devices: Due to its low power consumption and small package size, the chip can be used in portable devices like smartphones, tablets, or wearable devices. It can amplify audio signals, process sensor data, or perform other signal conditioning tasks. 3. Battery Management Systems: The MCP6232T-E/SN can be utilized in battery management systems to monitor and amplify signals from battery voltage sensors or current sensors. Its low power consumption is beneficial in such applications. 4. Signal Conditioning: The chip can be used for general-purpose signal conditioning tasks, such as amplifying weak signals, filtering noise, or adjusting signal levels. Its rail-to-rail input and output range and low distortion characteristics make it suitable for such applications. 5. Audio Amplification: The MCP6232T-E/SN can be employed in audio amplification circuits, such as headphone amplifiers or audio preamplifiers. Its low distortion, wide bandwidth, and rail-to-rail capabilities make it suitable for audio applications.It is important to note that the specific application and advantages of the MCP6232T-E/SN may vary depending on the requirements and design considerations of the particular project.
MCP6232T-E/SN Relevant information