Home / Instrumentation, OP Amps, Buffer Amps / LM321LVIDBVR/
LM321LVIDBVR

LM321LVIDBVR

Manufacturer No:

LM321LVIDBVR

Manufacturer:

Texas Instruments

Description:

IC OPAMP GP 1 CIRCUIT SOT23-5

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

LM321LVIDBVR Specifications

  • Type
    Parameter
  • Current - Output / Channel
    40 mA
  • Voltage - Input Offset
    1 mV
  • Current - Input Bias
    15 pA
  • Supplier Device Package
    SOT-23-5
  • Package / Case
    SC-74A, SOT-753
  • Mounting Type
    Surface Mount
  • Operating Temperature
    -40°C ~ 125°C (TA)
  • Voltage - Supply Span (Max)
    5.5 V
  • Voltage - Supply Span (Min)
    2.7 V
  • Current - Supply
    90µA
  • -3db Bandwidth
    -
  • Gain Bandwidth Product
    1 MHz
  • Slew Rate
    1.5V/µs
  • Output Type
    -
  • Number of Circuits
    1
  • Amplifier Type
    General Purpose
  • Packaging
    Cut Tape (CT)
  • Packaging
    Tape & Reel (TR)
  • Product Status
    Active
  • Series
    -
The LM321LVIDBVR is a low-power, low-voltage operational amplifier (op-amp) integrated circuit chip. It offers several advantages and can be applied in various scenarios. Here are some of its advantages and application scenarios:Advantages: 1. Low power consumption: The LM321LVIDBVR is designed to operate at low power levels, making it suitable for battery-powered applications or any scenario where power efficiency is crucial. 2. Low voltage operation: It can operate at low supply voltages, typically ranging from 2.7V to 5.5V. This makes it suitable for low-voltage applications or portable devices. 3. Rail-to-rail input and output: The op-amp supports rail-to-rail input and output voltage ranges, allowing it to handle signals close to the supply voltage rails. This feature is beneficial in applications where the input or output signals need to span the entire voltage range. 4. Wide temperature range: The LM321LVIDBVR can operate over a wide temperature range, typically from -40°C to 125°C, making it suitable for various environmental conditions.Application Scenarios: 1. Battery-powered devices: Due to its low power consumption and low voltage operation, the LM321LVIDBVR is well-suited for applications such as portable devices, wireless sensors, or any battery-powered electronics. 2. Signal conditioning: The op-amp can be used for signal conditioning tasks, such as amplification, filtering, or buffering of analog signals. Its rail-to-rail input and output capability make it suitable for applications where the input or output signals need to be accurately reproduced. 3. Sensor interfaces: The LM321LVIDBVR can be used to interface with various sensors, such as temperature sensors, pressure sensors, or light sensors. It can amplify and process the sensor signals to provide accurate measurements or control signals. 4. Audio applications: The op-amp can be used in audio circuits, such as headphone amplifiers, audio mixers, or audio filters. Its low power consumption and low voltage operation make it suitable for portable audio devices. 5. Industrial control systems: The LM321LVIDBVR can be used in industrial control systems, such as motor control, process control, or instrumentation. Its wide temperature range and low power consumption make it suitable for harsh industrial environments.These are just a few examples of the advantages and application scenarios of the LM321LVIDBVR integrated circuit chip. Its versatility, low power consumption, low voltage operation, and wide temperature range make it suitable for a wide range of electronic applications.
LM321LVIDBVR Relevant information