Home / Instrumentation, OP Amps, Buffer Amps / LTC6259HMS8#PBF/
LTC6259HMS8#PBF

LTC6259HMS8#PBF

Manufacturer No:

LTC6259HMS8#PBF

Manufacturer:

Analog Devices Inc.

Description:

IC OPAMP GP 2 CIRCUIT 8MSOP

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

LTC6259HMS8#PBF Specifications

  • Type
    Parameter
  • -3db Bandwidth
    -
  • Supplier Device Package
    8-MSOP
  • Package / Case
    8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
  • Mounting Type
    Surface Mount
  • Operating Temperature
    -40°C ~ 125°C
  • Voltage - Supply Span (Max)
    5.25 V
  • Voltage - Supply Span (Min)
    1.8 V
  • Current - Output / Channel
    10 mA
  • Current - Supply
    20µA (x2 Channels)
  • Voltage - Input Offset
    100 µV
  • Current - Input Bias
    5 nA
  • Gain Bandwidth Product
    1.3 MHz
  • Slew Rate
    0.24V/µs
  • Output Type
    Rail-to-Rail
  • Number of Circuits
    2
  • Amplifier Type
    General Purpose
  • Packaging
    Tube
  • Product Status
    Active
  • Series
    -
The LTC6259HMS8#PBF is a high-speed, low-power operational amplifier (op-amp) integrated circuit chip manufactured by Linear Technology (now part of Analog Devices). It offers several advantages and can be applied in various scenarios. Some of the advantages and application scenarios of the LTC6259HMS8#PBF are:Advantages: 1. High Speed: The LTC6259HMS8#PBF is a high-speed op-amp with a gain bandwidth product of 100MHz. It can handle fast signal processing requirements.2. Low Power Consumption: This op-amp chip operates at low power, making it suitable for battery-powered or low-power applications. It has a supply current of only 1.3mA.3. Rail-to-Rail Inputs and Outputs: The LTC6259HMS8#PBF supports rail-to-rail input and output voltage ranges, allowing it to handle signals close to the power supply rails. This feature is useful in applications where the input or output signals need to swing close to the supply voltage.4. Low Input Bias Current: With an input bias current of only 1pA, the LTC6259HMS8#PBF is suitable for applications where high input impedance is required, such as sensor interfaces or transimpedance amplifiers.5. Wide Supply Voltage Range: This op-amp chip can operate from a single supply voltage as low as 2.7V up to a maximum of 5.25V, providing flexibility in various power supply configurations.Application Scenarios: 1. Signal Conditioning: The LTC6259HMS8#PBF can be used in signal conditioning circuits for amplifying, filtering, or buffering analog signals. Its high speed and low power consumption make it suitable for applications such as data acquisition systems, instrumentation, or sensor interfaces.2. Active Filters: The high-speed capabilities of the LTC6259HMS8#PBF make it suitable for active filter designs, including low-pass, high-pass, band-pass, or notch filters. Its rail-to-rail inputs and outputs allow for maximum signal swing and dynamic range.3. Portable Devices: Due to its low power consumption and wide supply voltage range, the LTC6259HMS8#PBF can be used in portable devices such as smartphones, tablets, or wearable devices. It can be employed in audio amplification, signal conditioning, or sensor interfaces in these applications.4. Communications: The high-speed performance of the LTC6259HMS8#PBF makes it suitable for communication systems, including high-frequency amplification, data transmission, or receiver front-end circuits.5. Test and Measurement: The LTC6259HMS8#PBF can be used in test and measurement equipment, such as oscilloscopes, function generators, or spectrum analyzers. Its high speed and low power consumption are advantageous in these applications.It is important to note that the specific application and performance requirements may vary, and it is recommended to consult the datasheet and application notes provided by the manufacturer for detailed information and design considerations.
LTC6259HMS8#PBF Relevant information