Home / Instrumentation, OP Amps, Buffer Amps / LMC6484IM/
LMC6484IM

LMC6484IM

Manufacturer No:

LMC6484IM

Manufacturer:

Texas Instruments

Description:

IC CMOS 4 CIRCUIT 14SOIC

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

LMC6484IM Specifications

  • Type
    Parameter
  • Current - Output / Channel
    30 mA
  • Gain Bandwidth Product
    1.5 MHz
  • Supplier Device Package
    14-SOIC
  • Package / Case
    14-SOIC (0.154", 3.90mm Width)
  • Mounting Type
    Surface Mount
  • Operating Temperature
    -40°C ~ 85°C (TJ)
  • Voltage - Supply Span (Max)
    15.5 V
  • Voltage - Supply Span (Min)
    3 V
  • Current - Supply
    2.6mA (x4 Channels)
  • Voltage - Input Offset
    110 µV
  • Current - Input Bias
    0.02 pA
  • -3db Bandwidth
    -
  • Slew Rate
    1.3V/µs
  • Output Type
    Rail-to-Rail
  • Number of Circuits
    4
  • Amplifier Type
    CMOS
  • Packaging
    Tube
  • Packaging
    Bulk
  • Product Status
    Not For New Designs
  • Series
    -
The LMC6484IM is a quad operational amplifier integrated circuit chip manufactured by Texas Instruments. It offers several advantages and can be applied in various scenarios. Here are some of its advantages and application scenarios:Advantages: 1. Low Power Consumption: The LMC6484IM operates at a low supply current of 150μA per amplifier, making it suitable for battery-powered applications or low-power designs. 2. Rail-to-Rail Input and Output: It supports rail-to-rail input and output voltage ranges, allowing it to handle signals close to the supply rails, maximizing the dynamic range and minimizing distortion. 3. Wide Supply Voltage Range: The chip can operate from a single supply voltage as low as 2.7V up to a maximum of 15V, providing flexibility in various applications. 4. High Open-Loop Gain: The LMC6484IM has a high open-loop gain of 120dB, ensuring accurate amplification of small input signals. 5. Low Input Offset Voltage: It has a low input offset voltage of 500μV, minimizing errors in precision applications.Application Scenarios: 1. Sensor Signal Conditioning: The LMC6484IM can be used to amplify and condition signals from various sensors such as temperature sensors, pressure sensors, or light sensors. Its low power consumption and rail-to-rail capabilities make it suitable for portable or battery-powered sensor applications. 2. Audio Amplification: The chip can be utilized in audio amplification circuits, such as headphone amplifiers or audio preamplifiers. Its low distortion, wide supply voltage range, and rail-to-rail operation make it suitable for high-quality audio applications. 3. Instrumentation Amplifiers: The LMC6484IM can be used to build instrumentation amplifiers for precise measurement applications. Its low input offset voltage and high open-loop gain make it suitable for accurate signal amplification in instrumentation circuits. 4. Active Filters: The chip can be employed in active filter circuits, such as low-pass, high-pass, or band-pass filters. Its rail-to-rail capabilities and low distortion enable the design of filters with a wide dynamic range and minimal signal distortion. 5. Portable Devices: Due to its low power consumption and small form factor, the LMC6484IM is suitable for portable devices like handheld instruments, portable audio devices, or battery-powered systems where space and power efficiency are crucial.These are just a few examples of the advantages and application scenarios of the LMC6484IM integrated circuit chip. Its versatility and performance characteristics make it suitable for a wide range of analog signal processing applications.
LMC6484IM Relevant information