Home / Instrumentation, OP Amps, Buffer Amps / LT6004CMS8#PBF/
LT6004CMS8#PBF

LT6004CMS8#PBF

Manufacturer No:

LT6004CMS8#PBF

Manufacturer:

Analog Devices Inc.

Description:

IC OPAMP GP 2 CIRCUIT 8MSOP

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

LT6004CMS8#PBF Specifications

  • Type
    Parameter
  • -3db Bandwidth
    -
  • Supplier Device Package
    8-MSOP
  • Package / Case
    8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
  • Mounting Type
    Surface Mount
  • Operating Temperature
    0°C ~ 70°C
  • Voltage - Supply Span (Max)
    16 V
  • Voltage - Supply Span (Min)
    1.6 V
  • Current - Output / Channel
    9 mA
  • Current - Supply
    1.25µA (x2 Channels)
  • Voltage - Input Offset
    80 µV
  • Current - Input Bias
    7 pA
  • Gain Bandwidth Product
    3 kHz
  • Slew Rate
    0.55V/µs
  • Output Type
    Rail-to-Rail
  • Number of Circuits
    2
  • Amplifier Type
    General Purpose
  • Packaging
    Tube
  • Product Status
    Active
  • Series
    LT®
The LT6004CMS8#PBF is an integrated circuit chip manufactured by Linear Technology (now part of Analog Devices Inc.). It is a precision operational amplifier that has several advantages and can be used in various application scenarios. Here are a few of its advantages and application areas:Advantages: 1. Precision: The LT6004CMS8#PBF provides excellent accuracy, low input offset voltage (200μV maximum), low input bias current (20nA maximum), and low input offset drift (0.7μV/°C maximum), making it suitable for precision applications. 2. Low Noise: It features low input voltage noise (0.75μV RMS from 0.1Hz to 10Hz) and low current noise (0.45pA/√Hz), enabling it to be used in high-gain and low-noise applications. 3. Wide Supply Voltage Range: The chip can operate with a wide supply voltage range from 1.8V to 36V, allowing flexibility in different power supply configurations. 4. Rail-to-Rail Output Swing: The LT6004CMS8#PBF is capable of delivering near rail-to-rail output swing, which means it can drive signals close to the power supply rails.Application Scenarios: 1. Sensor Interfaces: The LT6004CMS8#PBF can be used to interface with various sensors, such as strain gauges, temperature sensors, and pressure sensors, due to its precision and low noise characteristics. 2. Data Acquisition Systems: It finds applications in data acquisition systems, where it is used to amplify and condition low-level signals before digitization, ensuring high accuracy and low distortion. 3. Battery-Powered Systems: The chip's wide supply voltage range and low quiescent current make it suitable for battery-powered applications, including portable and wearable devices, where power efficiency is critical. 4. Signal Conditioning: The LT6004CMS8#PBF can be used for amplification and filtering of small signal inputs in applications like audio amplifiers, active filters, and instrumentation amplifiers. 5. Control Systems: It can be utilized in control systems for precision servo control, motor control, and actuator control, providing accurate signal amplification and conditioning.It is important to note that these advantages and application scenarios serve as general examples, and the specific use case may vary depending on the circuit design and requirements.
LT6004CMS8#PBF Relevant information