Home / Instrumentation, OP Amps, Buffer Amps / LTC6256CTS8#TRMPBF/
LTC6256CTS8#TRMPBF

LTC6256CTS8#TRMPBF

Manufacturer No:

LTC6256CTS8#TRMPBF

Manufacturer:

Analog Devices Inc.

Description:

IC OPAMP GP 2 CIRCUIT TSOT23-8

Datasheet:

Datasheet

Delivery:

Payment:

Please send RFQ , we will respond immediately.

LTC6256CTS8#TRMPBF Specifications

  • Type
    Parameter
  • -3db Bandwidth
    4.5 MHz
  • Supplier Device Package
    TSOT-23-8
  • Package / Case
    SOT-23-8 Thin, TSOT-23-8
  • Mounting Type
    Surface Mount
  • Operating Temperature
    0°C ~ 70°C
  • Voltage - Supply Span (Max)
    5.25 V
  • Voltage - Supply Span (Min)
    1.8 V
  • Current - Output / Channel
    35 mA
  • Current - Supply
    65µA (x2 Channels)
  • Voltage - Input Offset
    100 µV
  • Current - Input Bias
    5 nA
  • Gain Bandwidth Product
    6.5 MHz
  • Slew Rate
    1.8V/µs
  • Output Type
    Rail-to-Rail
  • Number of Circuits
    2
  • Amplifier Type
    General Purpose
  • Packaging
    Cut Tape (CT)
  • Packaging
    Tape & Reel (TR)
  • Product Status
    Active
  • Series
    -
The LTC6256CTS8#TRMPBF is a low power, low noise operational amplifier (op-amp) integrated circuit chip manufactured by Linear Technology (now part of Analog Devices). Some of the advantages and application scenarios of this chip are as follows:Advantages: 1. Low power consumption: The LTC6256CTS8#TRMPBF is designed to operate at very low power levels, making it suitable for battery-powered applications or any other power-constrained systems. 2. Low noise: This op-amp chip has a low input voltage noise, which makes it suitable for applications that require high precision and low distortion. 3. Wide supply voltage range: The chip can operate from a wide range of supply voltages, typically from 2.7V to 5.5V, allowing flexibility in various applications. 4. Rail-to-rail input and output: The LTC6256CTS8#TRMPBF supports rail-to-rail input and output voltage ranges, enabling it to handle signals that span the entire supply voltage range. 5. High bandwidth: This op-amp chip has a high unity-gain bandwidth, allowing it to handle high-frequency signals accurately.Application scenarios: 1. Portable devices: The low power consumption and wide supply voltage range make the LTC6256CTS8#TRMPBF suitable for use in portable devices such as smartphones, tablets, and wearable electronics. 2. Sensor interfaces: The low noise and high precision of this op-amp chip make it ideal for amplifying and conditioning signals from various sensors, such as temperature sensors, pressure sensors, or strain gauges. 3. Audio amplification: The low distortion and high bandwidth of the LTC6256CTS8#TRMPBF make it suitable for audio amplification applications, such as headphone amplifiers or audio preamplifiers. 4. Data acquisition systems: The low noise and high precision of this chip make it suitable for use in data acquisition systems, where accurate measurement of analog signals is required. 5. Industrial control systems: The wide supply voltage range and rail-to-rail input/output capability of the LTC6256CTS8#TRMPBF make it suitable for use in industrial control systems, where it can interface with various sensors and actuators.These are just a few examples of the advantages and application scenarios of the LTC6256CTS8#TRMPBF op-amp chip. The actual usage may vary depending on the specific requirements of the application.
LTC6256CTS8#TRMPBF Relevant information